Operation - Westfalia 86 98 98 Original Instructions Manual

Connecting the Adapter to the Tap
1. Remove the tap nozzle.
2. Screw on the adapter using the supplied rings and
seals.
NOTE! If the adapter does not fit, remove the large washer.
Connecting the Drain Cleaning Hose
1. Make sure the tap is closed.
2. Screw the drain cleaning hose onto the tab
adapter. The cut-off valve on the adapter must be
closed.
Flushing the Drain
1. Insert the nozzle into the clogged drain.
2. Hold the hose firmly in the drain and turn on the
water. The water must be lukewarm, not hot.
Open the cut off valve on the adapter.
3. Move the hose up and down in the drain until the
blockade is cleared.
If the device is connected to a garden hose use the
included garden hose adapter.
Technical Data
Hose Length:
Hose Diameter:
Diameter Adapter Threads:

OPERATION

2.5 m
3
/ " (~10 mm)
8
¾", ½" interior, W 24 x
6
1
/ "
10