Jimmy Styks INFLATABLE WATER MAT Owner's Manual page 5

5.
6. INFLATABLE BACK REST & INFLATABLE CANAPY ASSEMBLY
(If applicable)
1. Align and attached the velcros locate on the bottom of the canopy frame to the water mat
deck.
2. Inflate the canopy frame.
3. Align and attached canopy cover on top of the canopy frame.
4. fasten the buckles and tight up the webbing.
5. Inflate the backrest, DO NOT inflate it more than 1 PSI.
6. Align and attached the velcros locate on the bottom of the backrest to the water mat deck.
<12 PSI
IMPORTANT NOTE : Before setup the inflatable canapy or the inflatable backrest, please
visit "https://youtu.be/dWjS_Ko5xes" or scan below QR code for the full video instruction.
SCAN THIS QR CODE
READ BEFORE SETUP
THE CANAPY &
BACKREST
8 9