Nuu Garden AF125C Instruction Manual page 10

Note: Carefully unpack all parts from the box, compare parts with package content listed above, make sure all parts are present before
beginning assembly of product. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service
for replacement parts.
Step 1: Attach side panels (B&C) to table top (A) with 4bolts (J18) and
4 washers (L08) by using hex screw driver (HO).
NOTE: DO NOT tighten the screws completely.
Hardware Used:
J18 Bolts (M6*18) x 4
L08 Washer (M6*20) x 4
HO Hex screw driver x 1
Step 2: Attach side panels (D&E) to side panels (B&C) with 4 bolts
(J35) and 4 washer (L15) using hex screw driver (HO).
NOTE:DO NOT tighten the screws completely.
Hardware Used:
J35 Bolts (M6*35) x 4
L15 Washer (M6*16) x 4
HO Hex screw driver x 1
Step 3: Attach tank base (F) to side panels (D&E) with 4 bolts (J30)
and 4 washer (L15) using hex screw driver (HO).
NOTE: Tighten all screws completely.
Hardware Used:
J30 Bolts (M6*30) x 4
L15 Washer (M6*16) x 4
HO Hex screw driver x 1
ASSEMBLY INSTRUCTIONS
9