Switching The Tv On/Off - JVC InteriArt LT-26B60BU Instructions Manual

Inserting batteries in the remote
control handset
• Remove the battery cover located on the back
of the handset by gently pulling downwards
from the indicated part.
• Insert two AA/R6 dry cell or equivalent type of
batteries inside.
• Replace the battery cover.
NOTE: Remove the batteries from remote con-
trol handset when it is not to be used for a long
period.Otherwise it can be damaged due to
any leakage of battery.
Old batteries must be disposed in a desig-
nated area. If performance of the remote con-
trol reduces, replace the batteries with the cor-
rect type. Do not combine a used, old battery
or a new one or mixed battery types. Remove
dead batteries immediately to prevent acid
from leaking into the battery compartment.
Downloaded from: https://www.usersmanualguide.com/

Switching the TV ON/OFF

To switch the TV on
Your TV will switch on in two steps:
1- Connect the
Press the On/Off switch at the rear of the
TV. Then the TV switches itself to stand-by
mode and the power lamp becomes red
located on the front of the TV.
2- To switch on the TV from stand-by mode
either:
Press the “
or on the right side of the TV
or,
Press a digit button on the remote control so
that a programme number is selected,
or,
Press “
mote control or on the right side of the TV, so
that last switched off programme is selected.
Either way the TV will switch on and the power
lamp will become green.
To switch the TV off
• Press the “
trol or on the right side of the TV, so the TV
will switch to stand-by mode and the power
lamp will become red.
NOTE: To switch the TV off completely, press
the On/Off switch at the rear of the TV or re-
move the mains plug from the socket.
ENGLISH - 11 -
power cord to the system.
/ I” button on the remote control
” or “ ” buttons on the re-
/ I” button on the remote con-