Page 2
SPECIFICATION Contents LT-32A70BU Items LT-26A70BJ LT-26A70BU LT-32A70BJ LT-32A70GU LT-26A70SJ LT-26A70SU LT-32A70SJ LT-32A70SU Dimensions ( W × H × D ) 68.6 cm × 51.4 cm × 24.4 cm [Included stand] 82.0 cm × 58.8 cm × 24.4 cm [Included stand] 68.6 cm ×...
SECTION 1 PRECAUTION SAFETY PRECAUTIONS [EXCEPT FOR UK] (1) The design of this product contains special hardware, (6) Isolation Check (Safety for Electrical Shock Hazard) many circuits and components specially for safety After re-assembling the product, always perform an purposes. For continued protection, no changes should be isolation check on the exposed metal parts of the cabinet made to the original design unless authorized in writing by (antenna terminals, video/audio input and output terminals,...
Page 4
SAFETY PRECAUTIONS [FOR UK] (1) The design of this product contains special hardware and many circuits and components specially for safety purposes. For continued protection, no changes should be made to the original design unless authorized in writing by the manufacturer. Replacement parts must be identical to those used in the original circuits.
Page 5
INSTALLATION 1.3.1 HEAT DISSIPATION 1.3.3 INSTALLATION REQUIREMENTS If the heat dissipation vent behind this unit is blocked, cooling To ensure safety in an emergency such as an earthquake, and efficiency may deteriorate and temperature inside the unit will to prevent accidents, ensure that measures are taken to prevent rise.
Page 6
HANDLING LCD PANEL 1.4.1 PRECAUTIONS FOR TRANSPORTATION 1.4.2 OPTICAL FILTER (ON THE FRONT OF THE LCD PANEL) When transporting the unit, pressure exerted on the internal LCD (1) Avoid placing the unit under direct sunlight over a panel due to improper handling (such as tossing and dropping) prolonged period of time.
DIGITAL VNR PICTURE MODE This function cuts down the amount of noise in the original This function can adjust the picture settings automatically. picture. MAIN DIFFERENCE LIST Item LT-26A70BJ LT-26A70SJ LT-26A70BU LT-26A70SU Paint Color Black Silver Black Silver ←...
Page 8
21-PIN EURO CONNECTOR (SCART) : EXT-1 / EXT-2 Pin No. Signal designation Matching value EXT-1 EXT-2 AUDIO R output 500mV(rms) (Nominal), Low impedance Used (TV OUT) Used (LINE OUT) AUDIO R input 500mV(rms) (Nominal), High impedance Used (R1) Used (R2) AUDIO L output 500mV(rms) (Nominal), Low impedance Used (TV OUT)
Page 9
TECHNICAL INFORMATION 2.4.1 LCD PANEL This unit uses the flat type panel LCD (Liquid Crystal Display) panel that occupies as little space as possible, instead of the conventional CRT (Cathode Ray Tube), as a display unit. Since the unit has the two polarizing filter that are at right angles to each other, the unit adopts "normally black" mode, where light does not pass through the polarizing filter and the screen is black when no voltage is applied to the liquid crystals.
Page 10
2.4.2 MAIN CPU PIN FUNCTION [IC3 : MAIN PWB] Pin name Function Pin name Function 1 P9_4 O PANEL_POWER_CONTROL 51 A17 O Program ROM address for CPU 2 P9_3 O POWER 52 A16 O Program ROM address for CPU 3 P9_2 O SC_RGB_CONTROL 53 A15 O Program ROM address for CPU...
SECTION 3 DISASSEMBLY DISASSEMBLY PROCEDURE CAUTION AT DISASSEMBLY: • Make sure that the power cord is disconnected from the outlet. • Pay special attention not to break or damage the parts. • When removing each board, remove the connectors as required. Taking notes of the connecting points (connector numbers) makes service procedure manageable.
Page 12
STAND ASS'Y BACK BRACKET SHIELD COVER REAR SIDE REAR COVER MAIN PWB RATING LABEL STNAD BRACKET POWER CORD INSULATOR POWER PWB TERMINAL BASE The terminal of a connector is turned up and connected. terminal side MAIN BASE Check that connector is inserted completly. (Don't insert aslant) LCD PANEL UNIT SPEAKER...
Page 13
MEMORY IC REPLACEMENT • This model uses the memory IC. • This memory IC stores data for proper operation of the video and drive circuits. • When replacing, be sure to use an IC containing this (initial value) data. 3.2.1 MEMORY IC REPLACEMENT PROCEDURE 1.
Page 14
3.2.3 SETTINGS OF FACTORY SHIPMENT 3.2.3.1 BUTTON OPERATION 3.2.3.2 REMOTE CONTROL DIRECT OPERATION Setting item Setting position Setting item Setting position POWER CHANNEL CHANNEL VOLUME VOLUME ZOOM AUTO TV/AV 3D SOUND SUB POWER 3.2.3.3 REMOTE CONTROL MENU OPERATION (1) PICTURE (4) FEATURES Setting item Setting position...
Page 15
REPLACEMENT OF CHIP COMPONENT 3.3.1 CAUTIONS (1) Avoid heating for more than 3 seconds. (2) Do not rub the electrodes and the resist parts of the pattern. (3) When removing a chip part, melt the solder adequately. (4) Do not reuse a chip part after removing it. 3.3.2 SOLDERING IRON (1) Use a high insulation soldering iron with a thin pointed end of it.
SECTION 4 ADJUSTMENT ADJUSTMENT PREPARATION 4.5.2 HOW TO ENTER THE SERVICE MODE (1) Press [INFORMATION] key and [MUTING] key on the (1) The adjustment using the REMOTE CONTROL UNIT is remote control unit simultaneously to enter the SERVICE made on the basis of the initial setting values. The MODE SCREEN.
Page 17
4.5.5.2 DESCRIPTION OF STATUS DISPLAY (4) WHITE BALANCE State of the colour temperature is displayed. SETTINGITEM No. SETTING ITEM SETTING VALUE (DATA) NOTE: In ADJUSTMENT MODE, the colour temperature can be set only to "NORMAL". When it is entered to ADJUSTMENT S001 5I R OF S001 5I R OF MODE, it is automatically changed to "NORMAL", even if...
Page 18
INITIAL SETTING VALUES IN THE SERVICE MODE • Perform fine-tuning based on the "initial values" using the remote control when in the Service mode. • The "initial values" serve only as an indication rough standard and therefore the values with which optimal display can be achieved may be different from the default values.
Page 19
Item No. Item name Variable range Setting value Item No. Item name Variable range Setting value S088 HD WM R DR 0 - 255 D048 HD75 S SHA 0 - 255 S089 HD WM G DR 0 - 255 D049 HD75 S COL 0 - 255 S090...
Page 20
Item No. Item name Variable range Setting value D098 BRI TIN 0 - 255 D099 0 - 255 4.6.1.3 AUDIO SYSTEM SETTING-1 Item No. Item name Variable range Setting value A001 S BASS 0 - 255 A002 S TRE 0 - 255 A003 3D LEVEL 0 - 255...
ADJUSTMENT PROCEDURE 4.7.1 VIDEO CIRCUIT Measuring Item Test point Adjustment part Description instrument WHITE Remote [1.ADJUST] (1) Receive a PAL 75% all white signal. BALANCE control unit S031: CVBS R DR (Red drive) (2) Set PICTURE MODE to "STANDARD". (HIGHLIGHT) S032: CVBS G DR (Green drive) (3) Set ZOOM to "FULL".
Page 22
Victor company of Japn, Limited Display category 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama-city, Kanagawa-prefecture, 221-8528, Japan (No.YA492) Printed in Japan...
PARTS LIST CAUTION The parts identified by the symbol are important for the safety . Whenever replacing these parts, be sure to use specified ones to secure the safety. The parts not indicated in this Parts List and those which are filled with lines --- in the Parts No. columns will not be supplied. P.W.
Page 24
USING P.W. BOARD & REMOTE CONTROL UNIT ......................3-3 EXPLODED VIEW PARTS LIST ............................3-4 EXPLODED VIEW ..................................3-5 PRINTED WIRING BOARD PARTS LIST [LT-26A70BJ, LT-26A70BU, LT-26A70SJ, LT-26A70SU] ........3-6 MAIN P.W. BOARD ASS'Y (SFT-1051A-U2) .......................3-6 CONTROL P.W. BOARD ASS'Y (SFT-7251A-U2) ....................3-10 IR P.W. BOARD ASS'Y (SFT-8951A-U2) ........................3-11 POWER P.W.
PRINTED WIRING BOARD PARTS LIST [LT-26A70BJ, LT-26A70BU, LT-26A70SJ, LT-26A70SU] MAIN P.W. BOARD ASS'Y (SFT-1051A-U2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local UDZW8.2B-X Z DIODE UDZW8.2B-X Z DIODE EDD1232AABH-6B UDZW5.6B-X Z DIODE...
Page 29
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local NCB31CK-104X C CAPACITOR 0.1uF 16V K C165 NCJ21CK-106X-R C CAPACITOR 10uF 16V K NCB31CK-104X C CAPACITOR 0.1uF 16V K C166 NCJ21CK-106X-R C CAPACITOR 10uF 16V K NCB31CK-104X C CAPACITOR 0.1uF 16V K...
Page 30
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C272 NCB31HK-104X C CAPACITOR 0.1uF 50V K C755 NCB31HK-104X C CAPACITOR 0.1uF 50V K C273 NCB31HK-104X C CAPACITOR 0.1uF 50V K C756 NCB31HK-104X C CAPACITOR 0.1uF 50V K C274 NCB31AK-105X...
Page 31
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R111 NRSA63J-330X MG RESISTOR 33Ω 1/16W J R220 NRSA63J-392X MG RESISTOR 3.9kΩ 1/16W J R112 NRSA63J-330X MG RESISTOR 33Ω 1/16W J R221 NRSA63F-562X MG RESISTOR 5.6kΩ...
IR P.W. BOARD ASS'Y (SFT-8951A-U2) Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C9509 QEHR1HM-336Z E CAPACITOR 33uF 50V M QCZ9071-471 C CAPACITOR 470pF AC400V K C9512 IC8001 KSM-2013TC2EL IR DETECT UNIT C9514 QCB31HK-471Z C CAPACITOR...
PRINTED WIRING BOARD PARTS LIST [LT-32A70BJ, LT-32A70BU, LT-32A70GU, LT-32A70SJ, LT-32A70SU] Ref No. Part No. Part Name Description Local MAIN P.W. BOARD ASS'Y (SFT-1052A-U2) Ref No. Part No. Part Name Description Local UDZW8.2B-X Z DIODE UDZW8.2B-X Z DIODE UDZW5.6B-X Z DIODE EDD1232AABH-6B UDZW5.6B-X Z DIODE...
Page 35
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local NCB31CK-104X C CAPACITOR 0.1uF 16V K C165 NCJ21CK-106X-R C CAPACITOR 10uF 16V K NCB31CK-104X C CAPACITOR 0.1uF 16V K C166 NCJ21CK-106X-R C CAPACITOR 10uF 16V K NCB31CK-104X C CAPACITOR 0.1uF 16V K...
Page 36
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local C272 NCB31HK-104X C CAPACITOR 0.1uF 50V K C755 NCB31HK-104X C CAPACITOR 0.1uF 50V K C273 NCB31HK-104X C CAPACITOR 0.1uF 50V K C756 NCB31HK-104X C CAPACITOR 0.1uF 50V K C274 NCB31AK-105X...
Page 37
Ref No. Part No. Part Name Description Local Ref No. Part No. Part Name Description Local R111 NRSA63J-330X MG RESISTOR 33Ω 1/16W J R220 NRSA63J-392X MG RESISTOR 3.9kΩ 1/16W J R112 NRSA63J-330X MG RESISTOR 33Ω 1/16W J R221 NRSA63F-562X MG RESISTOR 5.6kΩ...
Description Local 2AA070311 BATTERY COVER PACKING [LT-26A70BJ, LT-26A70BU, LT-26A70SJ, LT-26A70SU] 11 12 STAND ASS'Y FRONT PACKING PARTS LIST [LT-26A70BJ, LT-26A70BU, LT-26A70SJ, LT-26A70SU] Ref.No. Part No. Part Name Description Local GA10002-095A-U PACKING CASE GA10180-081A-U EURO LABEL LT-26A70BJ GA10180-078A-U EURO LABEL...
PACKING [LT-32A70BJ, LT-32A70BU, LT-32A70GU, LT-32A70SJ, LT-32A70SU] 10 11 STAND ASS'Y 13 14 FRONT PACKING PARTS LIST [LT-32A70BJ, LT-32A70BU, LT-32A70GU, LT-32A70SJ, LT-32A70SU] Ref.No. Part No. Part Name Description Local GA10002-087B-U PACKING CASE GA10180-087A-U EURO LABEL LT-32A70BJ GA10180-084A-U EURO LABEL LT-32A70BU GA10272-074A-U EURO LABEL LT-32A70GU GA10180-086A-U EURO LABEL...
LT-26A70BJ LT-26A70BU LT-26A70SJ LT-26A70SU LT-32A70BJ LT-32A70BU LT-32A70GU LT-32A70SJ LT-32A70SU STANDARD CIRCUIT DIAGRAM NOTE ON USING CIRCUIT DIAGRAMS 1.SAFETY Type No indication : Ceramic capacitor The components identified by the symbol and shading are : Metalized mylar capacitor critical for safety. For continued safety replace safety ciritical : Polypropylene capacitor components only with manufactures recommended parts.
Page 43
POWER PWB PATTERN .......................... 2-23 CONTROL PWB PATTERN ........................2-24 IR PWB PATTERN ............................ 2-24 VOLTAGE CHARTS .................. 2-25 WAVEFORMS .................... 2-26 USING P.W. BOARD PWB ASS'Y name LT-26A70BJ LT-26A70BU LT-26A70SJ LT-26A70SU MAIN P.W. BOARD SFT-1051A-U2 CONTROL P.W. BOARD SFT-7251A-U2 IR P.W.
WAVEFORMS VOLTAGE CHARTS <IR PWB> MAIN PWB (1/4) <MAIN PWB> [P.2-7 - P.2-8] [P.2-17 - P.2-18] (SHEET1) MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE DC (V) DC (V) DC (V) DC (V) DC (V) DC (V) DC (V) DC (V) DC (V)
Page 56
Victor Company of Japan, Limited Display Category 12, 3-chome, Moriya-cho, kanagawa-ku, Yokohama-city, kanagawa-prefecture, 221-8528, Japan (No.YA492) Printed in Japan...