Advertisement
HANDLE REPLACEMENT
Set Screw
Adapter
*
Connector
"D" Washer
Pivot Stop
Retainer Nut
IT IS NOT NECESSARY TO SHUT OFF WATER SUPPLIES.
1. Remove plug button or cap from the handle by prying "it" upwards from the
bottom center. If a tool is required, use something which will not scratch the
handle.
2. Using the 7/64" hex key wrench, "unscrew the set screw located behind the plug
button or under the cap", turning hex key counter clockwise to remove set screw.
Lift off handle body.
3. Pull off dome. Unscrew pivot retainer counterclockwise and remove.
4. Remove cartridge screw by turning counterclockwise with a Phillips screwdriver.
front
5. See exploded parts view to identify the part to be replaced.
6. Reassemble by doing steps 1-4 in reverse.
Find out more about home bath and faucets we have.
Advertisement
