SAGEMCOM F@ST 3896 SUM Quick Setup Manual page 3

Resetting the F@ST 3896 SUM
Your residential gateway is equipped with a reset
button reachable with a paper clip or the tip of a pen.
To restart the device, press the reset button for less
than 2 seconds.
To restore the device to factory configuration, press the
reset button for 5 seconds or longer before releasing.
The residential gateway will then restart and perform
the initialization sequence. Note that the unit may
take several minutes to become online after a factory
reset is performed.
FRONT PANEL LED DESCRIPTION
LED
Power
Downstream
Upstream
Online
WLAN 2.4 GHz
WLAN 5 GHz
WPS
TEL 1
TEL 2
LAN
MOCA
State
On
Off
Off
Amber
Green
On
Amber
Green
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
Reset
button
Description
DC power present
No DC power
No DOCSIS connection
DOCSIS 3.0 up
DOCSIS 3.1 up
No DOCSIS connection
DOCSIS 3.0 up
DOCSIS 3.1 up
Internet connection available
Internet connection unavailable
2.4 GHz radio active
2.4 GHz radio disabled
5 GHz radio active
5 GHz radio disabled
WPS active
WPS not active
Enabled and phone connected
Line disabled or no phone connected
Enabled and phone connected
Line disabled or no phone connected
Link up on LAN interface
Link down on LAN interface
MoCA interface is active
MoCA interface is disabled
Ethernet cable
Cat-5e or better