Sunbeam 4817 Instruction Manual page 2

When using electrical appliances, basic safety instructions should always be followed
including the following:
1. READ ALL INSTRUCTIONS BEFORE USING THE FOOD PROCESSOR.
2. To protect against risk of electrical shock, do not put food processor in water
or other liquid. This may cause personal injury or damage to the product.
3. Close supervision is necessary when any appliance is used by, or near, children
or incapacitated persons.
4. Unplug from outlet when not in use, before putting on or taking off parts and
before cleaning.
5. Do not contact moving parts. Keep hands, hair, clothing and other utensils away from
chopping blade during operation to reduce the risk of injury to persons and/or
damage to the Food Processor.
6. Do not operate Food Processor with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to the
nearest authorized Sunbeam Appliance Company service facility for examination,
repair or electrical or mechanical adjustment.
7. The use of attachments not recommended or sold by Sunbeam Appliance Company
may cause fire, electrical shock or injury.
8. Do not let cord touch hot surfaces or hang over table edges or counters.
9. Do not use outdoors or for commercial purposes.
10. Blade and Processing Disk are sharp. Handle carefully.
11. To reduce the risk of injury to persons, never place Cutting Blade on Base
without first putting Container properly in place.
12. Be certain Container Cover is securely locked in place while operating appliance.
13. Never feed food by hand. Always use Food Pusher.
14. Do not attempt to defeat the cover interlock mechanism.
NOTE: The maximum current rating is based on the attachment for this product
that draws the greatest current. Other accessories may draw less current.
FOR PRODUCTS PURCHASED IN THE US. AND CANADA ONLY:
This appliance is equipped with a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
2