Advertisement

Quick Links

AVCOMM Technologies Inc.
User Manual
Copyright Notice
© AVCOMM. All rights reserved.
About This Manual
This user manual is intended to guide a professional installer to install and to configure the SEVR Series . It includes
procedures to assist you in Avoiding unforeseen problems.
NOTE:
Only qualified and trained personnel should be involved with installation, inspection, and repairs of this switch.
Disclaimer
Avcomm reserves the right to make changes to this Manual or to the product hardware at any time without notice. Information
provided here is intended to be accurate and reliable. However, it might not cover all details and variations in the equipment
and does not claim to provide for every possible contingency met in the process of installation, operation, or maintenance.
Should further information be required, or should particular problem arise which are not covered sufficiently for the user's
purposes, the matter should be referred to Avcomm. Users must be aware that updates and amendments will be made from
time to time to add new information and/or correct possible unintentional technical or typographical mistakes. It is the user's
responsibility to determine whether there have been any such updates or amendments of the Manual. Avcomm assumes no
responsibility for its use by the third parties.
Avcomm Online Technical Services
At Avcomm, you can use the online service forms to request the support. The submitted forms are stored in server for Avcomm
team member to assign tasks and monitor the status of your service. Please feel free to write to
www.avcomm.us
if you
encounter any problems.
AVCOMM technologies Inc.
www.avcomm.us
333 West Loop N, St 460, Houston, TX 77024
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SEVR-M Series and is the answer not in the manual?

Questions and answers

Summary of Contents for AVCOMM SEVR-M Series

  • Page 1 Avcomm Online Technical Services At Avcomm, you can use the online service forms to request the support. The submitted forms are stored in server for Avcomm team member to assign tasks and monitor the status of your service. Please feel free to write to www.avcomm.us...
  • Page 2: Table Of Contents

    Disable virtual serial port........................36 Import virtual serial port list......................37 Export virtual serial port list ....................... 38 c) Options ..............................39 d) About ..............................40 e) Exit ................................40 AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 3: Chart 1: Sevr-Mx Series Serial Device Server Overview

    ☆Each serial port provides 5 signals, including RXD, TXD, RTS, CTS, GND. ☆ 32-bit embedded 400MHz CPU,128M RAM. ☆Both the network port and the power supply have independent indicator, which can easily indicate the working status. AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 4: C) Scenarios

    Serial device server factory IP address 192.168.1.125 sub-page code 255.255.255.0 c) Scenarios Virtual serial port mode P2P Mode AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 5: Chart 2: Sevr-Mx Series Serial Device Server Installation Introduction

    Chart 2: SEVR-Mx Series Serial Device Server Installation Introduction Software installation introduction 1. IP address lookup and changing software Refer to the attachment. 2. Virtualized serial port software Refer to the attachment LED indicator introduction AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 6: C) Pin Definition

    EIA/TIA 568B Definition EIA/TIA 568B RJ45 Orange& White Orange Green& White Blue Data+ Data+ Blue & Data- Data- White Green Brown& Data+ Data+ White Brown Data- Data- AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 7: Chart 3: Sevr-Mx Series Serial Device Server Technical Parameter

    -40℃————85℃ -40℃————85℃ -40℃————85℃ Temp Storage 5%————95% 5%————95% 5%————95% 5%————95% Humidity DC12~48V,350mA@12Vm DC12~48V,350mA@12Vm DC12~48V,350mA@12Vm Power Supply DC12~48V,350mA@12Vmax Appearan Housing Metal Metal Metal Metal 100mm×80.8mm×30mm 100mm×80.8mm×30mm 161mm×91mm×37mm 161mm×91mm×37mm Size AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 8: B) Product Accessory (1 Set)

    User company name Maintenance staff, contact Fill in the name of the device maintenance personnel and their contact information to facilitate the internal management of the user company AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 9: B) System Setting

    IP address to access the device),Cancel (no changes) ---Address Filter (Set the serial device service to filter the networking address) System Setting AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 10 Select the newly added user permissions, Users is the user permissions account, by default only one administrator user is allowed for a device. Submit, Cancel Submit (must be submitted after setting the above options to complete the settings),Cancel (no changes) AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 11 Check to enable sending administrator password change event signal password Submit, Cancel Submit (must be submitted after setting the above options to complete the settings),Cancel (no changes) AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 12 5,System Setting---MQTT Settings (Set the MQTT parameters and options for the serial device server) Enable MQTT Check to enable MQTT and the device will create MQTT client tasks Server Address Setting the MQTT server address AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 13: C) Serial Port Setting

    (no changes) Apply to all serial ports Apply all serial ports (if the settings are the same for each serial port, you can check the sub-item) AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 14: D) Operating Mode (Server Operating Mode)

    (no changes) Apply to all serial ports Apply all serial ports (you can check this if the settings for each serial port are the same) AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 15 (no modification) Apply to all serial ports Apply all serial ports (if the settings are the same for each serial port, you can check the sub-item) AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 16 (no modification) Apply to all serial ports Apply all serial ports (if the settings are the same for each serial port, you can check the sub-item) AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 17 Since the MCP and VCOM modes correspond to different virtual serial software, you need to confirm one of them when selecting this mode Data Port This is the port corresponding to the virtual serial port software driver for data communication (not configurable) AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 18 (no modification) Apply to all serial ports Apply all serial ports (if the settings are the same for each serial port, you can check the sub-item) AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 19 If the parameters are set to the device in compliance with the rules), cancel (without modification) Apply to all serial ports Apply all serial ports (if the settings of each serial port are the same, you can check the next item) AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 20 (no modification) Apply to all serial ports Apply all serial ports (if the settings are the same for each serial port, you can check the sub-item) AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 21 AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 22: E) Status Search

    Check the network connection status of the serial port, click "Refresh" to update to the latest status status Serial communication Check the communication status of the serial port, click "Refresh" to update to the latest status status AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 23 Serial communication parameters Network connection status AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 24: F) Equipment Management

    Port restart Check the port that needs to be restarted, and restart the port after submission System restart Click "Restart" to restart the serial server. Firmware upgrade AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 25 Restore Factory Port Restart AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 26: Chapter 5: Troubleshooting Instructions For Sevr-Mx Series Serial Server

    1. Make sure to open the serial port normally. 2. Observe whether the IP and port numbers under [Serial to Ethernet Tool][ connected to 0 from 1] indicate "Connected", if AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 27: D) Forgot The Password Set Before

    When the RUN light resumes and flashes slowly at 1 second intervals, the device restores to factory settings. At this time, the factory initial account password admin: admin can be used to log in to the system, The factory IP address is static: 192.168.1.125. AVCOMM technologies Inc. www.avcomm.us...
  • Page 28: E) Sending And Receiving Data Is Garbled

    Figure 4 , Click OK to display search device information on the VCOM interface, as shown in Figure 5, the device has been added; AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 29 Figure1 Figure2 AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 30 Figure3 Figure4 AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 31: B) Com Mapping

    In the "VCOM", first select the added device, then select the remote devices Management interface, and click "Open in Browser" to enter the web login interface through the IE browser. b) COM Mapping Create a virtual serial port. AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 32 1, In the "VCOM", select COM Mapping—Add COM, the "Add Device" window will pop up, as shown in the figure below, and then click OK. AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 33 2, Then the following interface will pop up, that is, the corresponding virtual serial port will be created AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 34: Delete Virtual Serial Port

    In the "VCOM", first select the virtual serial port to be deleted, then select the COM Mapping interface, and click "Remove COM" to delete the virtual serial port, as shown in the figure below. AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 35: Modify The Virtual Serial Port

    "Modify COM" to pop up the interface as shown in Figure 1, and then select "COM6" to change Port4 to "COM6" to " COM11", as shown in Figure 2: Figure 1 Figure 2 AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 36: Enable Virtual Serial Port

    In the "VCOM", first select the virtual serial port that needs to be disabled, then select the COM Mapping interface, and click "Disable COM" to disable the corresponding virtual serial port, as shown in the figure below AVCOMM technologies Inc. www.avcomm.us...
  • Page 37: Import Virtual Serial Port List

    Figure 1. After clicking "Browse", select the saved virtual serial port configuration information as shown in Figure 2, and click "OK" You can import successfully as shown in Figure 3 AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 38: Export Virtual Serial Port List

    Figure 1. After clicking "Browse", select the path of the virtual serial port configuration information to be saved, and click "OK" to export Success is shown in Figure 2 AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 39: C) Options

    Figure1 Figure2 c) Options AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 40: D) About

    About Click the "About" button to view the software version information as shown in the figure below. e) Exit AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...
  • Page 41 Click the "Exit" button to exit the software. AVCOMM technologies Inc. www.avcomm.us 333 West Loop N, St 460, Houston, TX 77024...

This manual is also suitable for:

Sevr-m1Sevr-m2Sevr-m4Sevr-m8

Table of Contents