Page 1
INSTRUCTION MANUAL PRO-HD 12V/24V Pulse Charger & Battery Recovery Unit INTRODUCTION This manual contains important safety, operating and warranty information about your new charger. Before using the charger, please read all instructions and safety messages on the battery charger and on the battery.
Page 2
POWER CORD CARE: Do not operate the charger with a damaged cord or plug; replace them immediate- ly. To reduce the risk of damage to the electric plug and cord, please pull by the plug rather than the cord when disconnecting. Make sure that the cord is located so that it will not be stepped or tripped on or otherwise subjected to damage or unnecessary wear.
Page 3
!WARNING! GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS: This charger must be grounded to reduce risk of electric shock. It is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Page 4
CHARGER LOCATION Locate the charger as far away from the battery as the DC cables permit. Never place the charger directly above battery being charged since gases from the battery will corrode and damage the charger. Never allow battery acid to drip on the charger when reading specific gravity or filling the battery. Do not set a battery above, on top of charger or next to vents where fan may draw acid fumes inside the charger.
Page 5
PulseTech or (B) damaged in transit to PulseTech, or (2) the owner is not the original purchaser that purchased the product through an authorized PulseTech dealer or distributor. IN NO EVENT SHALL...
Need help?
Do you have a question about the PRO-HD 12V/24V and is the answer not in the manual?
Questions and answers