Table of Contents
Advertisement
A
P
LIGNMENT
ROCEDURE
00331-0398 <90-00044>
OPERATION
T
To call out from any terminal on the order wire system:
To call into the order wire system from the outside:
NOTE:
When using two-wire lines under loop control with no wink, the
person at the called order wire station must dial a “*” within
10 to 80 seconds (adjustable) or an automatic disconnect
occurs. (The “*” overrides the disconnect.) To terminate the call,
dial “#”. These are factory options and may be reversed if
desired. Refer to the 49018 practice for strapping options.
Neither step is necessary when using loop control with wink or
ground start trunks.
♦
♦
P
11
AGE
Advertisement
Table of Contents
