APP binding guidance
Download
①
Please scan the QR code below to
download Philips EasyKey Plus APP on
your phone.
Add a door lock
②
Scan QR code
1. After powering up the door lock, find
the QR code on the back of the battery
cover.
2. Open the "Philips EasyKey Plus" APP,
and click [Add a Device] on the home
page.
3. After scanning the QR code on the
battery cover, follow the instructions of
the APP to complete the binding process.
Manually adding the device
1. Enter the "Philips EasyKey Plus" APP,
and click [Add a device] on the home
page.
2. Search for the current door lock model
and enter the binding process.
3. Press [*] twice on the lock, enter
the master PIN code, and press [#]
to confirm, then the door lock will
be in master mode. Press [4] to "Join
a network", and the voice prompts
"binding, please wait".
③ Go back to the APP and follow the
prompt to finish the binding process.
14
Attention
The door lock only supports 2.4G band Wi-Fi
routers (5G band is not supported). Please ensure
the distance between the router and the door lock
is less than 10 meters, otherwise the Wi-Fi signal
might be weak.