LUNA2000-100KTL-M1 Smart Power Control System
User Manual
7.3 Replacing a Fan
● Before replacing a fan, power off the Smart PCS.
● When replacing a fan, use insulation tools and wear PPE.
Step 1 Remove the screws from the fan tray and store them properly. Pull out the fan
tray until it is flush with the Smart PCS.
Figure 7-4 Pulling out fan tray (1)
Step 2 Remove the cable ties shared by the cables, unscrew the connectors, and
disconnect the cables.
Figure 7-5 Disconnecting cables
Step 3 Pull out the fan.
Issue 02 (2023-01-10)
CA UTION
NO TE
If the fan gets stuck when being pulled or pushed, slightly lift it.
Copyright © Huawei Technologies Co., Ltd.
7 Device Maintenance
76