Advertisement
5. Press [
ADV] to advance the minute digits to the
desired time.
The timer is now set.
Note: If no buttons are pressed for 60-seconds during
the timer-setting function, the unit will automatically
exit the timer-setting mode.
To start the timer:
-
Press [ST / SP]. The timer will start.
Note:
- When the timer reaches 0:00:00 a beeping alarm will
activate to indicate that the timer has completed its
cycle. The alarm will last for one (1) minute. After one
minute, the alarm will continue to make one short
beeping sound once every two-minutes. To stop the
alarm, press any button and the timer will automatically
reset to the original timer setting.
- When the timer is active, the timer icon will appear and
be flashing on the pulse-mode display and the clock
display.
To stop the timer:
-
Press [ST / SP]. The timer will pause until [ST / SP] is
pressed again.
To clear the timer:
1. Press and hold [MODE] for 2-seconds. The digits will
return to zero and the hour digits will flash.
2. Without entering a number for the hours, press [MODE]
again. The Minute digits will flash.
3. Press [MODE] a final time to exit the timer-setting
mode.
The timer is now cleared.
To reset the timer to its originally set time:
-
Press and hold [ST / SP] for 2-seconds. The display
will return to its originally set time.
THE PULSEMETER
A person's pulse rate indicates the number of times that
the heart beats within a given amount of time. This unit
calculate how many times a heart will beat in one minute.
Monitoring pulse rate can be useful for determining
appropriate medication.
How to use the pulsemeter:
1. In either clock or timer display, press [PULSE], the
display will show a heart .
Advertisement
