Advertisement
is 12:00:00AM for time and 0:00:00 for the timer. The
current time will require manual setting.
A low-battery icon [
] indicates that the batteries require
changing.
Note: If not disposed properly, batteries can be
harmful. Protect the environment by taking
exhausted batteries to authorized disposal stations.
MEDICATION STORAGE
This device has a pillbox. Use the compartment for storing
medication.
WEARING THE PILLBOX
Using the attached cord, the device can be secured to
clothing.
GENERAL OPERATION
ABOUT DISPLAY MODES
This unit has a display for the time, a display for a timer
and a pulsemeter display.
Timer Display
Pulse Display
To alternate between the clock and timer display:
Press MODE.
To access the pulse display:
Press PULSE.
To exit the pulse display:
Press PULSE.
THE CLOCK
In clock display the unit will show the time. The time can
be displayed in a 12-hour or 24-hour format as hours,
minutes and seconds.
To set the current time:
1. Enter clock display.
Note: If the countdown timer is displayed, press
[MODE] to enter the clock mode. From pulse mode,
press [PULSE] to exit pulse mode followed by [MODE]
to toggle between clock and timer display.
2. In clock mode, press and hold [MODE] for two
seconds. The 12-hour value will flash.
Clock Display
12-hour Display
24-hour Display
Advertisement
