8. Switch your computer / phone to the same WiFi network which your Sinum central
device is connected to.
9. Launch the Firefox browser and go to https://search.sinum.tech to find your Sinum
central device. On this page it is also possible to download a central device search
application for Windows / iOS / Linux, thanks to which you can find your central device
without Internet access. Alternatively, you can download the Sinum app on your phone
to search for your Sinum central device in your local network.
10. After finding your Sinum central device, click GO.
11. Login to Central device, next go to Settings and update your software to newest version.
fig.1
1. To start Recovery mode, remove the upper part of the casing (fig.1), press and hold
the button on the back of the device (fig.2). Then, disconnect and reconnect the power
supply by holding the button for 5 seconds.
2. Active Recovery mode is indicated by the recovery mode control light
steady on.
3. Launch the Firefox browser and go to https://search.sinum.tech or download the
Sinum application on your phone to search for your Sinum central device.
4. Connect to the Sinum central device called „sinum-r".
5. The Recovery mode allows, among other things, to restore the factory settings or
return to the previous version of the software by changing the system partition.
1. To use the remote control of the Sinum central device as well as other devices
cooperating with it, you must register in the Cloud service at https://sinum.tech.
Follow the instructions on the screen.
2. Activate the Cloud account by clicking on the link sent to your e-mail.
3. Go to the Sinum central device Settings > Profile. Find the Cloud account section and
click Connect.
4. Log in to your Cloud account. A message will be sent to you, asking you to add your
Sinum central device to Cloud. Create a name and optionally a description.
5. To take full advantage of the device capabilities, log in by entering your Sinum central
device address in the browser.
2
1
Recovery mode
Cloud service
fig.2
which goes
Need help?
Do you have a question about the Sinum EH-01 and is the answer not in the manual?