Measuring Global Radiation; Measuring Diffuse Radiation - Kipp & Zonen CV 2 Instruction Manual

INSTALLATION OF THE CV 2
4.2

Measuring global radiation

The blower unit can be installed on a flat plate, using the CV 2 levelling
screws. Figures 4.2.1 and 4.2.2 refer to this situation. If problems with snow
build-up are expected, a hole can be made in the plate directly under the
ventilator. Make sure this hole does not exceed Ø 120 mm!
Max. Ø 120 mm M6 (2x)
Figure 4.2.1 Blower unit on a flat plate
200,8 mm
Top view
(without cover)
Screw M6 x 90 (2x)
Figure 4.2.2 Footprint of the CV 2 for mounting on a plate
13
INSTRUCTION MANUAL CV 2