Page 1
Operating manual Low voltage adapter cable 9926 32.ST.2210.1405_BA_V01_EN...
Page 2
TRANSLATION OF THE ORIGINAL OPERATING MANUAL All rights reserved. All text, images and graphics are subject to copyright and other intellectual property laws. Copyright 2021 Stodia GmbH. Image sources Symbols for warnings, prohibitions, mandatory actions and standards are taken from publicly accessible sources, such as the Internet.
Introduction Contents Contents ..........................3 Introduction ....................... 4 Preliminary information ......................4 Validity of the declaration of conformity .................. 4 Manufacturer specifications ...................... 4 Safety ......................... 5 Warning levels ..........................5 Important safety instructions..................... 6 Intended use ..........................7 Requirements for the target group .................... 7 Duties of the operator .........................
Stodia's portfolio also includes smart charging and battery technology, diagnostic systems, battery and cell management, and vehicle-wide measurement and diagnostic technology. With experience in both software and hardware development, Stodia GmbH is your dependable partner at every production stage, from prototyping to series production. 32.ST.2210.1405_BA_V01_EN...
This operating manual is only valid for the following product: Item number 22101405 Designation Low voltage adapter cable 9926 Warning levels This chapter provides information about the warning levels used in this operating manual. DANGER Failure to observe the safety instructions WILL result in death or serious injury!
Safety Important safety instructions This chapter contains the safety instructions that must be observed when handling the product. DANGER Danger of fatal electric shock! The electrical voltage in other systems is lethal and will cause death by electric shock! • Do not use the product for measurements on utility power circuits! •...
Safety Intended use Use the product only in accordance with this operating manual; otherwise electrical hazard protection cannot be guaranteed by the manufacturer. The product is used to adapt the VAS 5581/VAS 5581A diagnostic box to the vehicle-side plug connection specified by the vehicle manufacturer in the guided fault finding. The product may only be used on high-voltage systems that have been certifiably de- energized.
Product description Product description Scope of delivery Immediately check the condition of the product and the completeness of the delivery. If anything is missing or defective, please contact the manufacturer immediately. (1) Low voltage adapter cable (2) USB stick with operating manual Design Product design: (1) Plug for diagnostic box...
Product description Symbols and connections The following symbols are shown on the product: Symbol Meaning The manufacturer part number is used in conjunction with the serial number to identify the product. The disposal instructions prohibit disposal of the product with household waste. Always dispose of the product in accordance with all local disposal regulations.
Product description Technical data Rated data Values Manufacturer number 22101405 Maximum rated voltage DC 14V Maximum rated current Weight ~ 560g Cable length ~ 2600mm Ambient conditions Operation Storage Transportation Temperature 5°C to 40°C -20°C to 60°C -20°C to 60°C Elevation above sea Max.
Operation Operation This chapter provides information about the following activities: • Startup • Detaching the plug connection • Cleaning • Storage • Disposal • Maintenance Startup This section provides you with information about starting up and operating the product. WARNING Danger of fatal electric shock! The electrical voltage in high-voltage systems is lethal and can cause death by electric shock!
Page 14
Operation Connect the ground clip to a conductive part of the vehicle body. Connect the plug for the battery management controller (BMC) to the correct disconnected socket. Lock the connection. Connect the plug for the battery junction box (BJB) to the correct disconnected socket. Lock the connection.
Page 15
Operation Connect the plug to the diagnostic box. You can now perform measurements in accordance with the guided fault finding. 32.ST.2210.1405_BA_V01_EN...
Operation Detaching the plug connections WARNING Risk of explosion! Product components may produce sparks and electric arcs. • Do not use the product in potentially explosive atmospheres! 4.2.1 Detaching the plug connection for the diagnostic cable (15-pin) The plug connection has a manual locking mechanism. To release the plug connection: Swing the lever up.
Operation 4.2.2 Detaching the plug connection for the diagnostic cable (28-pin) The plug connection has a locking mechanism. To release the plug connection: Pull the locking mechanism out of the plug. The plug connection is unlocked. Pull the plug connection apart. ...
Operation Cleaning DANGER Danger of fatal electric shock! The electrical voltage in high-voltage systems is lethal and will cause death by electric shock! • Disconnect the product from all power sources before cleaning the product! Observe the safety instructions! Use only a dry cloth to clean the product. Disposal Observe the safety instructions! Always dispose of the product in accordance with all local disposal regulations.
Help Warranty Stodia GmbH grants a warranty period of 24 months from the date of purchase. The warranty is valid for demonstrable defects in functional material and workmanship. Further information on the warranty conditions can be found in the terms and conditions on the manufacturer’s website.
Need help?
Do you have a question about the 9926 and is the answer not in the manual?
Questions and answers