Summary of Contents for Home Decorators Collection VINWOOD 56001
Page 1
THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home...
Table of Contents Table of Contents ..............2 Assembly ................7 Safety Information ............... 2 Operation ................13 Warranty ................3 Care and Cleaning ............. 16 Pre-Installation ..............3 Troubleshooting ..............16 Installation ................6 Safety Information READ AND SAVE THESE INSTRUCTIONS. WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation.
A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law.
Page 4
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part Description Quantity Blade attachment screws Plastic wire connecting nut Hanger pin Locking pin Blade bracket screw...
Page 5
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Part Description Quantity Slide-on mounting bracket Light kit fitter assembly (inside canopy) Receiver Ball/downrod assembly Remote control Canopy 3-pin extension wire (66 in.) Decorative motor collar cover 2-pin extension wire (66 in.) Fan motor assembly Battery Blade IMPORTANT: This product and/or components are governed by...
Installation MOUNTING OPTIONS NOTE: You may need a longer downrod to maintain WARNING: To reduce the risk of fire, electric shock proper blade clearance when installing on a steep, sloped or personal injury, mount to an outlet box marked ceiling. The maximum angle allowable is 15° away from “Acceptable for fan support of 35 lb (15.9 kg) or less”, horizontal.
Assembly - Standard Ceiling Mount Preparing for mounting NOTE: The magnet is pre-attached on the canopy bottom cover for you to remove and install easily. □ Remove the magnetic canopy bottom cover (JJ) from the canopy (C) by pulling it off.
Page 8
Assembly - Hanging the Fan Attaching the fan to the electrical WARNING: To reduce the risk of fire, electric shock or personal injury, mount to an outlet box marked “Acceptable for fan support of 35 lb (15.9 kg) or less”, and use screws provided with the outlet box.
Page 9
Assembly - Hanging the Fan (continued) Installing the receiver WARNING: To reduce the risk of fire or electric shock, remember to disconnect power. The electrical wiring must meet all local and national electrical code requirements. The electrical source and fan must be 110/120 volts, 60Hz.
Page 10
Assembly - Hanging the Fan (continued) Wiring the fan to the receiver Outlet box NOTE: The fan comes with 12 in. lead wires for use with the provided 6 in. ball/downrod assembly (B). If you wish Green to use a longer downrod, attach the 3-pin extension wire (K) and 2-pin extension wire (L) to the fan by connecting the molded adaptor plugs from the extension wires to the 3-pin and 2-pin adaptor plugs from the fan.
Page 11
Assembly - Attaching the Fan Blades Attaching the fan blades □ Attach a blade (F) to a blade bracket (G) by inserting screws (AA) into the holes in the blade and through the blade bracket. Note that the rubber washers are pre-attached to the blade bracket. □...
Page 12
Assembly - Preparing the Remote Control Preparing the remote control NOTE: The remote control has already been paired to the ceiling fan for your convenience. If you have two of the same model fans in your home, please follow the steps below to control each fan independently.
Page 13
Operating Your Fan and Remote Control POWER ON/OFF Power Press and release the power button to turn the fan and light on or off. (fan and light on/off) NOTE: On start up your ceiling fan will oscillate back and forth. This is NORMAL OPERATION for DC ceiling fans as it goes through its calibration cycle.
Page 14
Application Set-Up NOTE: For more information on smart remote set up, please refer to the quick start guide located in the remote pack. NOTE: To use Alexa to change the color temperature of the light, please make sure the light is turned on first. Questions, problems missing parts? Please call Hubspace Customer service Getting started...
Page 15
Voice Commands The Vinwood 56 in. LED Indoor Smart Color Changing Ceiling Fan works with Alexa and Google Assistant. This section lists some of the voice commands you can use. To view these and other commands, go to http://hubspaceconnect.com/. Alexa Google When you want to...
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □...
Page 17
Questions, problems, missing parts? Before returning to the store, call Hubspace Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-592-5233 HOMEDEPOT.COM/HUBSPACE Retain this manual for future use. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 18
“Product Overview” section. GRACIAS Apreciamos la plena confianza depositada en Home Decorators Collection al comprar este ventilador de techo. Nos esforzamos en crear continuamente productos de calidad diseñados para mejoras del hogar. Visítanos por Internet para ver nuestra línea completa de productos...
Page 19
Tabla de contenido Tabla de contenido .............. 2 Ensamblaje ................7 Información de seguridad........... 2 Funcionamiento ..............13 Garantía ................3 Mantenimiento y limpieza ..........16 Preinstalación ..............3 Solución de problemas ............. 16 Instalación ................6 Información de seguridad LEE Y GUARDA ESTAS INSTRUCCIONES.
Garantía El proveedor garantiza de por vida, a partir de la fecha de adquisición por el comprador original, que el motor del ventilador no presenta defectos de fabricación ni de materiales al momento del envío desde la fábrica. El proveedor garantiza que el kit de luces, excluyendo cualquier vidrio, no tendrá defectos de fabricación ni de material en el momento del envío desde la fábrica por un período de cinco años después de la fecha de compra por parte del comprador original.
Page 21
Preinstalación (continuación) HERRAJES INCLUIDOS NOTA: Los herrajes no se muestran en tamaño real. Pieza Descripción Cantidad Tornillos para fijar las aspas Tuerca de plástico para conectar cables Pasador de soporte Pasador de cierre Tornillo para soporte de aspas...
Page 22
Preinstalación (continuación) CONTENIDO DEL PAQUETE Pieza Descripción Cantidad Pieza Descripción Cantidad Soporte de montaje deslizante Conjunto del soporte del kit de luces (dentro de la cubierta) Receptor Conjunto de tubo bajante/esfera Control remoto Cubierta Cable de extensión de 3 clavijas (66 plg = 1.7 m) Cubierta decorativa del collarín del motor Cable de extensión de 2 clavijas (66 plg = 1.7 m) Ensamblaje del motor del ventilador...
Instalación OPCIONES DE MONTAJE ADVERTENCIA: Para reducir el riesgo de incendio, descarga NOTA: Tal vez necesites un tubo bajante más largo para eléctrica o lesiones personales, instala solo en una caja mantener la altura mínima adecuada de las aspas, al instalar el eléctrica clasificada como “apropiada para sostener ventilador en un techo inclinado.
Page 24
Ensamblaje - Montaje estándar en techo Preparación para el montaje NOTA: El imán viene pre-fijado en la tapa inferior de la cubierta para quitar e instalar fácilmente. □ Retira la tapa inferior magnética (JJ) de la cubierta (C), tirando de ella hasta soltarla.
Page 25
Ensamblaje - Cómo colgar el ventilador Cómo fijar el ventilador a la caja eléctrica ADVERTENCIA: Para reducir el riesgo de incendio, descarga eléctrica o lesiones personales, instala solo en una caja eléctrica clasificada como “apropiada para sostener ventiladores de 35 lb (15.9 kg) o menos”...
Ensamblaje - Cómo colgar el ventilador (continuación) Cómo instalar el receptor ADVERTENCIA: Para reducir el riesgo de incendio o descarga eléctrica, recuerda desconectar la electricidad. El cableado eléctrico tiene que cumplir todos los requisitos de los códigos eléctricos nacionales y locales. La fuente de energía y el ventilador tienen que ser de 110/120 V y 60 Hz.
Page 27
Ensamblaje - Cómo colgar el ventilador (continuación) Cómo cablear el ventilador al receptor Outlet box Caja eléctrica NOTA: El ventilador viene con cables terminales de 12 plg (30.5 cm) para usar con el conjunto de tubo bajante/esfera (B) Green Verde de 6 plg (15.2 cm) incluido.
Page 28
Ensamblaje - Cómo fijar las aspas del ventilador Cómo fijar las aspas del ventilador □ Fija un aspa (F) en un soporte de aspa (G) colocando los tornillos (AA) en los orificios del aspa y a través del soporte de esta para asegurarlas.
Page 29
Ensamblaje - Cómo preparar el control remoto Cómo preparar el control remoto NOTA: El control remoto ya ha sido configurado con el ventilador de techo para tu conveniencia. Si tienes dos ventiladores del mismo modelo en tu hogar, sigue los pasos de abajo para controlar cada ventilador por separado.
Page 30
Cómo usar tu ventilador y control remoto ENCENDIDO/APAGADO: Encendido Power Presiona y suelta el botón para encender o apagar el ventilador y la luz. (ventilador y luz (fan and light on/off) NOTA: Al comenzar, tu ventilador de techo oscilará hacia adelante y encendido/apagado) hacia atrás.
Page 31
Configuración de la aplicación NOTA: Para obtener más información sobre la configuración del control remoto inteligente, consulta la guía de inicio rápido que se encuentra en el paquete del control remoto. NOTA: Para usar Alexa para cambiar la temperatura del color de la luz, asegúrate de que la luz esté...
Page 32
Comandos de voz El ventilador inteligente de techo Vinwood con luz LED que cambia de color, para interiores, de 56 plg (1.42 m) funciona con Alexa y el Asistente de Google. Esta sección enumera algunos de los comandos de voz que puedes utilizar. Para ver estos y otros comandos, visita http: //hubspaceconnect.com/. Alexa Google Cuando...
Mantenimiento y limpieza ADVERTENCIA: Asegura que la fuente de corriente está apagada antes de limpiar el ventilador. □ Debido al movimiento natural del ventilador, algunas conexiones pueden aflojarse. Revisa dos veces al año las conexiones de soporte, los soportes y los accesorios de las aspas.
Page 34
¿Preguntas, problemas, piezas faltantes? Antes de devolver a la tienda, llama al Servicio al Cliente de Hubspace de lunes a viernes, entre 8:00 a.m. a 7:00 p.m. (hora del Este), y los sábados de 9:00 a.m. a 6:00 p.m. (hora del Este) 1-877-592-5233 HOMEDEPOT.COM/HUBSPACE Conserva este manual para uso futuro.
Need help?
Do you have a question about the VINWOOD 56001 and is the answer not in the manual?
Questions and answers