Restoring The Device To - UniqAir Uniq 2 User Manual

6.2 Restoring the Device to Factory Settings
To fix possible malfunctions, the device can be restored to factory settings.
This will clear the Wi-Fi settings, Bluetooth® bonding, timers, and other
user data stored in the device's memory. All device firmware updates will be
removed, and the device will revert to its original factory version.
To restore factory settings, follow these steps:
1. If the device is added to the mobile application, remove it from the
application and ensure that it is not visible in the Bluetooth®
device list of the phone's operating system.
2. If the device is powered on, unplug the power cord from the outlet.
3. Place the device so that you can touch the buttons on the glass
front panel and simultaneously plug the power cord back into the
outlet.
4. Plug the power cord back into the outlet, and the device will start
up, and all front panel lights will turn on.
5. Restoring to factory settings is done by holding down the timer
button until the lights start blinking while the lights are on.
6. The device will restart, and the factory settings will be restored.
NOTE: It is recommended to update the device firmware to the latest
version after restoring the factory settings.
U n i q A i r | 13