Operation - Hama BRS3 Operating Instructions Manual

6. Operation

Note
• The functions described in this section are only available for Bluetooth
terminal devices.
• Note that the maximum range for Bluetooth
as walls, people, etc.
6.1. Bluetooth
®
Note – Pairing
• Make sure that your Bluetooth
is activated.
• Make sure that your Bluetooth
Bluetooth devices.
®
• For more information, please refer to the operating instructions of your terminal
device.
• Press and hold the Power/Release button (2) for about 3 seconds to switch on the
Bluetooth remote release. The LED indicator light (1) will begin to ash.
®
• This means the Bluetooth
• Open the Bluetooth
appears in the list of Bluetooth
• Select hama BRS3 and wait until the Bluetooth
connected in the Bluetooth
light (1) goes out.
• You can now use the Bluetooth
6
pairing (A)
-capable terminal device is on and Bluetooth
®
-capable terminal device is visible for other
®
remote release is searching for a Bluetooth
®
settings on your terminal device and wait until hama BRS3
®
devices found.
®
settings on your terminal device. The LED indicator
®
remote release.
®
is 10 metres without obstacles such
®
remote release is listed as
®
-capable
®
®
connection.
®