Hama BRS3 Operating Instructions Manual page 10

6.2. Automatic Bluetooth
Note
• Make sure that your Bluetooth
is activated.
• Make sure that your Bluetooth
Bluetooth devices.
®
• For more information, please refer to the operating instructions of your terminal
device.
• The Bluetooth
®
last paired with.
• Press and hold the Power/Release button (2) for about 3 seconds to switch
on the Bluetooth
• You can now use the Bluetooth
To switch off, press the Power / Trigger button (2) for approx. 5 seconds.
The LED pilot light (1) goes out.
connection (after successful pairing) (A)
®
-capable terminal device is on and Bluetooth
®
-capable terminal device is visible for other
®
remote release remains connected to the Bluetooth
remote release. The LED indicator light (1) will begin to ash.
®
remote release.
®
®
device it was
®
7 7