JVC GR-AX210 Instructions Manual page 16

16
Downloaded from: https://www.usersmanualguide.com/
Group 1
FADER CINEMA
F1 F2
F1 FADER
SEL.
Group 2
FOCUS EXP.
F1 F2
SEL. Viewfinder
Group 3
TITLE DISP.
F1 F2
SEL.
F1 button
F1
SEL
F2
Function SEL. button
PROGRAM AE select dial
FADE OUT
RECORDING
INTELLIGENT FUNCTION CONTROL
This feature makes it easier for you to make selections
F2 CINEMA
during the following modes: Fader, Cinema, Manual
Focus Adjust, Exposure Control, Display, and Instant
Title.
PREPARATION
1
Set the PROGRAM AE dial to any position except
LOCK.
SELECT MODE
2
Press Function SEL. until the required function's
F2 button
indication appears in the viewfinder.
ENTER SELECTION
3
Press either F1 or F2 (the one to the immediate left
of the desired function name).
NOTE:
If you set the PROGRAM AE dial to LOCK, F1 and F2
disappear from the viewfinder, indicating that IFC
(Intelligent Function Control) is unusable.
Fader
This feature allows smooth fade-in and fade-out to black
blank screen. Fade-in works at recording start, and
fade-out works at recording end or when you enter
Record–Standby mode.
SELECT MODE
1
Press Function SEL. until "FADER" appears to the
right of F1.
ENGAGE FADE–STANDBY MODE
FADE IN
2
Press F1 to engage the Fade–Standby mode.
"FADER"appears in the viewfinder.
START RECORDING
3
Press Recording Start/Stop to start recording and
activate fade-in.
OR . . .
END RECORDING
Press Recording Start/Stop to end recording and
engage fade-out.
NOTES:
● Pressing and holding the Recording Start/Stop button
allows you to record a black blank screen.
● The screen becomes slightly reddish when the Fader is
used with Sepia (
● With the Electronic fog filter mode (
engaged, the image fades in/out to a white screen.
Advanced Features
pg. 14).
pg. 14)