Citizen 0S25 Instruction Manual

Citizen 0S25 Instruction Manual

Hide thumbs Also See for 0S25:

Advertisement

Cal. 0S25 Instruction manual
CHRONOGRAPH FUNCTION: CENTER CHRONOGRAPH SMALL HAND 1/20sec.
TIMING UP TO 59 minutes 59 seconds.

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

C) SETTING THE DATE
D) USING THE CHRONOGRAPH
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
A) DISPLAYS AND BUTTONS
Chronograph
second hand
Button A
Hour hand
minute hand
24-hour hand
Chronograph
2nd Click Position
minute hand
1st Click Position
Second + 1/20
Normal crown position
second chronograph
Button B
hand
Calendar
B) SETTING THE TIME
1. Pull the crown out to the 2nd Click Position so that the second hand stops at (0) position.
2. Turn the crown to set the hour and minute hands.
3. When the crown is pushed back to the normal position in synchronization with a time signal,
small second hand begins to run.
1/3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 0S25 and is the answer not in the manual?

Questions and answers

Summary of Contents for Citizen 0S25

  • Page 1 Cal. 0S25 Instruction manual CHRONOGRAPH FUNCTION: CENTER CHRONOGRAPH SMALL HAND 1/20sec. TIMING UP TO 59 minutes 59 seconds. A) DISPLAYS AND BUTTONS B) SETTING THE TIME C) SETTING THE DATE D) USING THE CHRONOGRAPH E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
  • Page 2 C) SETTING THE DATE 1. Pull the crown out to the 1st Click Position. 2. Turn the crown anticlockwise to set the date. * If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. 3.
  • Page 3 E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure should be performed when the chronograph second hand does not return to the "ZERO" second position after the chronograph has been reset, and including after the battery has been replaced. 1. Pull the crown out to the 2nd Click Position. 2.

Table of Contents