Oregon Scientific DCA6808 Instruction Manual page 9

b) Power Off
To turn the camera off, press the "MODE button" until the
"Status LCD" displays
Release button". You will hear a "beep" and the
camera will turn off.
c) Self Timer
To enter the self-timer feature, press the "MODE button" until the
"Status LCD" displays
Release button" to activate the timer and start shooting.
There is a 10 second shooting delay. During this interval,
you can hear "beep" sound at every second.
d) Video Clip
Use this mode to capture action or motion shots. The Video Clip can
be downloaded and viewed as a movie or as individual photos.
To access the Video Clip mode, press the "MODE button" until
the "Status LCD" displays
e) Delete All Photos
To delete all photos stored in your camera, press the "MODE button"
until the "Status LCD" displays
this mode, press the "Shutter Release button" to start deleting all
photos. The symbol "CA" will blink 5 seconds to confirm the
deletion. Press the shutter release button again to delete the photo(s);
otherwise, the delete command will be cancelled and the camera will
revert to the default mode.
Important:
Before activating this mode, make sure that all desirable photos
have been downloaded to your PC.
. Then press the "Shutter
. Press the "Shutter
.
. When in
6