Page 2
STEP A ADD METAL SPRING CLIPS Insert part PB-1 into connectors MF-5, MF-3 & MF-7 PB-1 PB-1 MF-3 MF-7 MF-5 PB-1 PB-1 WARNINGS 1. Must be assembled by an adult. 2. To be used on a flat surface. 3. Check the frame is fully assembled and secured to the net before use. 4.
Page 3
STEP B ADD PLASTIC PUSH BUTTONS Insert all MF-6 parts into connectors MF-1, MF-2 & MF-7 MF-2 MF-7 MF-6 MF-1...
Page 5
STEP D POSTS TO CROSSBAR Attach tube MF6-2 to the MF-2 connectors MF-2 MF-2 MF6-2 MF6-2...
Page 6
STEP E BACK BASEBAR Assemble the BACK BASEBAR , Attaching tubes MF6-1 to MF-1 & MF-7 connectors DETAIL VIEW DETAIL VIEW MF-7 MF-7 MF12-1 MF6-1 MF6-1 MF6-1 MF-1 MF-7 MF-7 MF6-1...
Page 7
STEP F BASE POSTS TO BASEBAR Connect tube s MF6-3 to the MF- 7 connectors. MF6-3 MF6-3 MF6-3 MF6-1 MF-7 DETAIL VIEW MF-7 MF-7...
Page 8
STEP G CROSSBAR TO BASE FRAME Attach the CROSSBAR & POSTS to the BASE FRAME using the MF-2 connectors. MF6-2 MF-2 MF6-3 MF6-2 MF6-2 DETAIL VIEW MF6-3 MF-2 MF-2 MF6-3...
Page 9
STEP H CONNECTING DIAGONAL BRACE Attach tubes MF6-4 & MF6-5 to the parts MF-3 DETAIL VIEW MF-3 MF6-4 MF6-5...
Page 10
STEP I BRACE TO GOAL FRAME Connect tubes MF6-4 & MF6-5 to parts MF-5 & MF-7 MF-5 DETAIL VIEW MF-5 MF6-4 MF6-4 MF-5 MF6-4 MF6-5 DETAIL VIEW MF6-5 MF6-5 MF-7 MF-7 MF-7...
Page 11
STEP J ATTACHING NET Wrap net around frame using the label in the TOP LEFT CORNER as a starting point. Use the M4 net clips to further secure the net as shown. ATTACH NET...
Page 12
FOLDING INSTRUCTIONS 1. Remove back base section labelled 1 2. Click push buttons labell ed 2 3. As you click the buttons move the base tubes labelled 3 towards the goal TO SEE FOLDING VIDEO SCAN ME WHEN NOT IN WHEN NOT IN...
Tämä tuote on purettava käytön jälkeen ja se on säilytettävä kuivassa paikassa. Muussa tapauksessa takuu mitätöityy. HERE TO HELP! - The QuickPlay Team Dette er et lett produkt.; vi har designet det slik at du raskt Det här är en portabel produkt. Vi har utformat den så att og enkelt kan sette det opp og ta det ned.