Lamp Hours; Factory Default - Optoma EP910 Manual

Optoma ep910: user guide

Hide thumbs Also See for EP910:

Table of Contents

User Controls

Auto Shutdown

Sets the interval of power-off of the system, if there is no signal

input. (In minutes). The projector will power down automatically if

there is no signal. Auto shut down sets the delay time.

VGA Out

Choose the source for the VGA loop throught output, VGA or DVI.

Lamp Hours

Display the cumulative lamp operating time.

Lamp Reminding

Choose this function to show or to hide the warning message when

the changing lamp message is displayed. The message will appear

30 hours before end of life.

Reset Lamp Hours

Reset the lamp life hour counter after replacing the lamp.

Choose "Enter" to return the display parameters on all menus to the

factory default settings.

English

Table of Contents

Show Quick Links

Table of Contents