Space-Ray 600 Installation Manual

Electric radiant heat panel

Advertisement

Quick Links

®
INSTALLATION MANUAL
Electric Radiant Heat Panel
Model Panel
Please note:
Panel heaters are designed and manufactured for indoor use only and
should be used in conjunction with energy saving controls to comply
with EU2015/118.

Advertisement

Table of Contents
loading

Summary of Contents for Space-Ray 600

  • Page 1 ® INSTALLATION MANUAL Electric Radiant Heat Panel Model Panel Please note: Panel heaters are designed and manufactured for indoor use only and should be used in conjunction with energy saving controls to comply with EU2015/118.
  • Page 2: Table Of Contents

    Content Important Introduction Specification Dimensions Installation Mounting 4.1.1 Wall mounting 4.1.2 Ceiling mounted 4.1.3 Fitted within a suspended/false ceiling Operation Safety Maintenance Cleaning Recycling Information...
  • Page 3: Important

    1. Important • Do not cover or obstruct the heater while it is in use. CAUTION! When using Spaceray electric heaters, basic precautions should always be followed to reduce the risk • Do not place material or garmets on the heater, or of fire, electric shock, and injury to persons, including the obstruct the air circulation around the heater, for following:...
  • Page 4: Introduction

    2. Introduction 4. Installation The Panel range of heaters contain no serviceable parts All Panel models are fitted with a mains supply cable, and are designed for indoor use only. therefore it is unnecessary to open the heater body to carry out installation of this product.
  • Page 5: Ceiling Mounted

    Always isolate the heater from the mains supply when mounting or adjusting the heater position. • The heat panels are suitable for ceiling mounting with the optional ceiling mounting brackets availa- ble from Space-Ray. Note. it can also be hung from Fig. E...
  • Page 6: Fitted Within A Suspended/False Ceiling

    Fig. F Fig. J Fig. K 4.1.3 Fitted within a suspended/false ceiling CAUTION Fig. G Always isolate the heater from the mains supply when mounting or adjusting the heater position. • The heat panels are suitable for mounting in false/ suspended ceilings as the dimensions are the same as standard ceiling tiles.
  • Page 7: Operation

    6.1 Cleaning Before cleaning the heater disconnect/switch off from the mains power supply and ensure the appliance is cool. The heater should be wiped with a soft damp cloth and dried. Do not use abrasive cleaning products or polishes as these can damage the finish of the heater. 7.
  • Page 8 ® Tel: +44(0)1473 830 551 Fax: +44(0)1473 832055 www.spaceray.co.uk info@spaceray.co.uk Gas Fired Products (UK) Ltd Chapel Lane Claydon Ipswich Suffolk, IP6 0JL FACTORIES: IPSWICH, ENGLAND - CHARLOTTE, N.C, U.S.A Panel Manual January 2023...

This manual is also suitable for:

9001200

Table of Contents