Advertisement
Remove the electric plug from the outlet when the devices is not to
be used for extend periods of time, or during electrical storms.
When removing the electric plug from the device or an outlet, always
hold the plug itself and not the cord. Pulling by the cord can damage
it.
When transporting or moving the device, always use two or more
people. Attempting to lift the device by yourself may damage your
back, result in other injury, or cause damage to the device itself.
Before moving the device, remove all connected cables.
When setting up the device, make sure that the AC outlet you are
using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug from
the outlet.
Do not use the device in a confined, poorly ventilated location. Make
sure that there is adequate space between the mixer and
speaker cabinet, make sure to allow adequate space between the
can result in overheating, possibly causing damage to the device(s),
or even fire.
so could result in damage or personal injury.
Avoid setting all equaliser controls to their maximum. Doing so may
cause feedback and may damage the speakers.
Do not expose the device to excessive dust or vibrations, or extreme
cold or heat (such as in direct sunlight, near a heater, or in a car
during the day) to prevent the possibility of panel cabinet
deformation or damage to the internal components.
Do not place the device in an unstable position where it might
accidentally fall over.
Do not use the device in the vicinity of a TV, radio, stereo
equipment, mobile phone, or other electronic devices. Doing so may
result in noise, both in the loudspeaker itself and in the TV or radio
next to it.
Before connecting the device to other devices, turn off the power
for all devices. Before turning the power on or off for all devices,
set all volume levels to minimum.
Use only the AC cord supplied. Use of other types of AC cords
may result in damage to the device(s), or even fire.
When turning on the AC power in your audio system, always
turn on the device LAST, to avoid speaker damage. When
turning the power off, the device should be turned off FIRST for
the same reason.
Do not insert your fingers or hands in any gaps or openings on
the device (vents, ports, etc.).
Avoid inserting or dropping foreign objects (paper, plastic, metal,
etc.) into any gaps or openings on the device (vents, ports, etc.).
If this happens, turn off the power immediately and unplug the
power cord from the AC outlet. Then have the device inspected
by qualified service personnel.
Do not use the device for a long period of time at a high or
uncomfortable volume level, since this can cause permanent
hearing loss. If you experience any hearing loss or ringing in the
ears, consult a physician immediately.
Do not operate the device if the sound is distorting. Prolonged
use in this condition could cause overheating and result in fire.
Do not rest your weight on the device or place heavy objects on
it, and avoid use excessive force on the buttons, switches or
connectors.
Using a cell phone near the speaker system can induce noise. If
this occurs, move the cell phone further away from the speaker
system.
Air blowing out of the bass reflex ports is normal with heavy
bass content.
Always turn the power off when the device is not in use. The
performance of components with moving contacts, such as
switches, volume controls and connectors can deteriorate over
time. Consult qualified service personnel about replacing
defective parts.
Advertisement
