Advertisement
Quick Links
Advertisement
Summary of Contents for IHOS NAXOS Series
- Page 1 NAXOS 10A DSP NAXOS 12A DSP NAXOS 15A DSP NAXOS 18A SUB...
- Page 2 From the detail required to faithfully reproduce classical music, to the low frequency response, power and clarity demanded by dance music, the NAXOS Series will not disappoint.
- Page 3 NAXOS Series loudspeakers have been designed and constructed to comply with all applicable safety regulations for their intended country of use. However, the advice in this manual must be followed in order to maintain safety. Failure to do so may result in damage to the speaker, to other equipment, personal injury, electric shock, or death.
- Page 4 Before connecting AC power or any external equipment to the loudspeaker, ensure that all controls are set to their minimum positions. NAXOS Series loudspeakers are capable of reproducing considerable bass (low frequencies) which can cause gradual movement or creeping of the speaker cabinet at high volume levels and could result in the loudspeaker falling.
- Page 5 Remove the electric plug from the outlet when the devices is not to Before connecting the device to other devices, turn off the power be used for extend periods of time, or during electrical storms. for all devices. Before turning the power on or off for all devices, set all volume levels to minimum.
- Page 6 In the unlikely event of a suspected fault, in the first instance, always consult this manual to eliminate user error. If you require further information, technical support or service, please contact your supplying dealer or distributor, or email sales@i-hos.eu...
- Page 9 1.Before connecting the power or signal cables, mount or position your NAXOSLoudspeaker where you intend to use or try it, do not carry it with any cables connected. 2. Set the MIC/LINE and BT/AUX input levels to minimum, the Master EQ controls to their mid positions, then connect the AC power and switch on the Loudspeaker.
- Page 10 4. Slowly increase the level control of the corresponding MIC/LINE inputs. You should hear music from the Loudspeaker. 1.Using the relevant cable, such devices can be connected by wire to any of the NAXOS mini jack to mini jack stereo cable. 2.
- Page 11 The volume of both speakers can be controlled by your host device. Your NAXOS Series Loudspeaker incorporates a DSP (Digital Signal Processing) system which has 4 preset modes of equalisation (tone control) to suit your intended mode of operation.
- Page 12 No adjustment or maintenance of NAXOS Loudspeakers is necessary and cleaning should only be done using a dry, non-abrasive cloth or dry dusting brush. NAXOS Series Loudspeakers are warranted in the EU only for one year from the date of supply or delivery against faulty parts or manufacturing defects. The warranty excludes electrical or mechanical faults or damage as a result of over driving by excessive input signal, excessive AC voltage, abuse, misuse, or failure to observe the operating guidelines detailed in this manual.
- Page 13 Model NAXOS 10A DSP NAXOS 12A DSP NAXOS 15A DSP Bal XLR/TRS 6.35/ Bal XLR/TRS 6.35/ Bal XLR/TRS 6.35/ Inputs AUX/ Bluetooth AUX/ Bluetooth AUX/ Bluetooth Outputs Balanced XLR / TWS Balanced XLR / TWS Balanced XLR / TWS 150W (LF) + 50W (HF) 250W (LF) + 50W (HF) 250W (LF) + 50W (HF) Power output...
- Page 14 NAXOS 18A SUB Inputs 2 XLR / TRS LINE input Outputs 500 w/RMS @ 8 Ohms / 1500 Watts P Main v nput 100V/240V ~50/60Hz swit Class D+ swit hing p w 180°) LED p w 120Hz) A v v 35-150Hz Max Output SPL 8 Ohm...