Installation STEP 1 Install Bottom Runner Draw a centre line on the cabinet bottom. Position the runner along the centre line, with the front fixing hole 130mm from the front edge of the carcass. Secure the front and rear fixing holes with screws. Bottom Runner Cent re lin e STEP 2...
Page 4
Installation Continued... STEP 3 Installing the Central Frame Secure the frame to the bottom runner. Adjust the height of the frame to fit the cupboard (between 1850mm - 2100mm) and fix to the top runner. Note: If you extend over 1850mm, drill and mount a 4th fixing bracket. Fixing screw Adjustment screw STEP 4...
Page 5
Installation Continued... STEP 5 Adjust the Depth Alignment Loosen the Fixing Screw before adjusting the Adjustment Screw. Once perfect adjustment is made, then tighten the Fixing Screw so that it doesn’t move out of place. Adjustment screw Fixing screw STEP 6 Adjust the Horizontal Alignment Loosen the Fixing Screw before adjusting the Adjustment Screw.
Page 6
Installation Continued... STEP 7 Attach the Baskets Insert the Basket Hanger Clips on the Central Frame at regular intivals. Hang the Wire Baskets on the Basket Hanger Clips. Wire Basket Basket Hanger Clip...