Advertisement
Quick Links
Installation Continued...
STEP 7
Adjust the L-shaped bracket with the castors, make sure the castors are
put into the U-shaped slot completely and tighten the screws with a
screw reamer.
STEP 8
Install the runner protective cover.
STEP 9
Install panel hangsrip.
90
STEP 10
Screw the screws out of the connecting strip, as the sequence revealed
in the picture, connect the slip frame and the top of the panel hangstrip
with the connecting strip (Attention: The connecting strip has the
differentiation from left and right), and tighten the screws.
STEP 11
Screw the screws out of the connecting strip, as the sequence revealed
in the picture, connect the slip frame and the bottom of the panel
hangstrip with the connecting strip (Attention: The connecting strip has
the differentiation from left and right), and tighten the screws.
90
Cabinet
Z
450 / 500
315
DIY Installation Guide
Tandem Larder
Unit
Advertisement
Related Manuals for Gelmar Tandem Larder Unit
Summary of Contents for Gelmar Tandem Larder Unit
- Page 1 Installation Continued... STEP 10 DIY Installation Guide Screw the screws out of the connecting strip, as the sequence revealed in the picture, connect the slip frame and the top of the panel hangstrip Tandem Larder STEP 7 with the connecting strip (Attention: The connecting strip has the Adjust the L-shaped bracket with the castors, make sure the castors are differentiation from left and right), and tighten the screws.
- Page 2 Tandem Larder Unit Installation STEP 4 We recomend that you install a shelf at the top of your cabinet, A: Screw the loaded screws out of the slip frame, attach L-shaped creating more storage space and reducing the extension height of...