Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Holzstar OSS 100
Summary of Contents for Holzstar OSS 100
- Page 1 Instruction manual Oscillating spindle sanding machine OSS 100 OSS 100...
-
Page 2: Table Of Contents
Passing on as well as copying of this document, the use and distribution of its content are prohibited if not explic- itly permitted. Contraventions are liable to compensa- tion. Subject to technical modifications and error. OSS 100 | Version 1.02... -
Page 3: Introduction
All information and notes in these operating instructions You have made a good choice by purchasing the Oscilla- were summarised taking the applicable standards and ting spindle sanding machine made by HOLZSTAR. rules, the state-of-the-art and our long-term knowledge and experiences into consideration. -
Page 4: Obligations Of The Operating Company
- The operator must have all safety devices checked bears the legal product responsibility for the protection of the user, the staff or for third parties. regularly for their good working order and their in- tegrity. OSS 100 | Version 1.02... -
Page 5: Qualification Of Personnel
Certain works may only be performed by specialist per- sonnel of the manufacturer. Other personnel is not au- thorized to perform these works. Please contact our cus- tomer service for the execution of all arising work. OSS 100 | Version 1.02... -
Page 6: Safety Signs On The Machine
- Perform regular maintenance. - Do not overload the machine. - If the machine is not operating normally, the super- visor must be informed immediately. OSS 100 | Version 1.02... -
Page 7: Technical Data
5.3 Storage Fig. 2: Type plate OSS 100 The spindle sander must be thoroughly cleaned before storing in a dry, clean and frost-free environment. Cover the machine with a protective tarpaulin. -
Page 8: Scope Of Delivery And Accessories
To do this, remove all indi- vidual parts from the box and compare them with the fol- lowing illustration. Fig. 3: OSS 100 Scope of Delivery 6.2 Accessories Fig. 4: Description We recommend only using high quality original Holzstar accessories. -
Page 9: Assembly And Connection
Fig. 5: Insert lower spindle disc Step 3: Place the lower spindle disc on the spindle and Operate the Oscillating spindle sanding machine only on push it downwards. an electrical supply, the following requirements OSS 100 | Version 1.02... - Page 10 D Inside [mm] Fig. 8: Place grinding sleeve on sanding roller Step 6: Place the appropriate sanding sleeve on the san- ding roller. NOTE! The grinding sleeve 13 mm is placed directly on the spindle. OSS 100 | Version 1.02...
-
Page 11: Working With The Machine
- Since the machine has no clamping option, it is im- Wear ear protection! portant that your workpiece is resting on the worktable over the entire surface and can be held firmly! - Never sand an unsupported workpiece. Support the workpiece with the table. OSS 100 | Version 1.02... -
Page 12: Care, Maintenance And Repair
- Connections and repairs of the electrical equipment may only be carried out by a qualified electrician Wear protective clothing! NOTE! Never use strong detergents for all cleaning work. This can lead to damage or destruction of the device. OSS 100 | Version 1.02... -
Page 13: Troubleshooting
Remove all environmentally hazardous materi- als from the old device. Step 2: Remove the machine optionally into manage- able and actionable assemblies and compo- nents. Step 3: Leading the machine components and supplies the appropriate disposal routes. OSS 100 | Version 1.02... -
Page 14: Disposal Of Electrical Appliances
- Position No: 54 The order No. is: 0-5903500- 54 - Before the article number is a 0 to write. - Before the position numbers 1 to 9 is also a 0 to write. OSS 100 | Version 1.02... -
Page 15: Spare Parts Drawing
The following drawing is intended to help in case of service, to identify necessary spare parts. To order send a copy of the parts drawing with marked components to your dealer. Fig. 11: Spare parts Drawing OSS 100 OSS 100 | Version 1.02... -
Page 16: Ec Declaration Of Conformity
- Safety - Part 1: General requirements DIN ISO 12100 -1:2010 Safety of machinery. General principles for design Risk assessment and risk reduktion (ISO 12100:2010 Responsible for documentation: Kilian Stürmer, Dr.-Robert-Pfleger-Str. 26, D-96103 Hallstadt Hallstadt, den 11.01.2017 ______________________ Kilian Stürmer Manager OSS 100 | Version 1.02... -
Page 17: Notes
Notes 15 Notes OSS 100 | Version 1.02... - Page 18 www.holzstar.de...
Need help?
Do you have a question about the OSS 100 and is the answer not in the manual?
Questions and answers