Page 2
All rights reserved. No part of this document may be reproduced, transferred, copied, stored on a retrieving system or transla- ted into another language, by any means whatsoever, with the exception of personal use, without the written permission of noax Technologies AG. All product names are registered trademarks or subject to the copyright of their respective compa- nies.
........... . . Mounting C12 and C15 compact enclosures .
Page 4
The specifications of your N6 (P6) mainboard are listed on the type plate (A, B or C: For differences see the technical data in chapter í Please find more information on our web page at www.noax.com. Page 4 of 28 www.noax.com BDA−N6−ALL−US−1.0...
Please use the Industrial PC only when it is in a good, undamaged condition! Any problems and/or malfunctions which could reduce safety must be corrected immediately (for example, defective power cord or enclosure)! Our professional service will take care of any repair. BDA−N6−ALL−US−1.0 www.noax.com Page 5 of 28...
PC before connecting an external device (with the exception of connecting Hot Plug de- vices to USB and Firewire interfaces). Please take care, that the connecting cables to the Industrial PC, are not too short or stretched. Page 6 of 28 www.noax.com BDA−N6−ALL−US−1.0...
(e.g. screws) can damage the display. Only use soft cloths to clean the touch screen. Avoid scratches. Please also observe the instructions in the chapter 5 "Servicing and cleaning the Industrial PC". BDA−N6−ALL−US−1.0 www.noax.com Page 7 of 28...
The mounting bracket serves the purpose of holding the external power supply unit. The external power supply unit can be mounted directly on the wall, for example, using the mounting holes in the bracket. Page 8 of 28 www.noax.com BDA−N6−ALL−US−1.0...
2 2 0 1 9 8 the distances between the drill holes shown in 1 7 4 the drawing to the surface provided for at- tachment. 1 4. 5 1 4 5 BDA−N6−ALL−US−1.0 www.noax.com Page 9 of 28...
(available as an option: "Modifica- tion for mobile use"). Special mounting brackets are available for mobile applications. í You can find more information about installation and mounting brackets on our web page www.noax.com Page 10 of 28 www.noax.com BDA−N6−ALL−US−1.0...
For safety reasons, do not remove the firmly placed stoppers from the T−Slots. Make sure that the T−bars and stoppers are securely tightened! í Please find more information about the mounting brackets in our web page www.noax.com. BDA−N6−ALL−US−1.0 www.noax.com Page 11 of 28...
Page 12
Installation and setup Fig. 20 Rear panel C12 3 5 9 2 7 4 Fig. 21 Rear panel C15 2 7 4 4 4 4 1 − T−bar 2 − Stopper To mount the Industrial PC. to a surface, follow the direction in the drawing.
Mounting the stainless steel S12 and S15 Fig. 22 Rear panel S12 36 4 4 x M 5 Fig. 23 Rear panel S15 4x M 5 To mount the Industrial PC. to a surface, follow the direction in the drawing. BDA−N6−ALL−US−1.0 www.noax.com Page 13 of 28...
Installation of the Panel Mount P12 and P15 Fig. 24 Installation cut−out for P12 and P15 ø6 ø6 ø7 ø7 ø6 ø6 1 − Cut−out for installation 2 − Dimensions of the front panel of the Industrial PC Page 14 of 28 www.noax.com BDA−N6−ALL−US−1.0...
Page 15
Depth of the Panel Mount P12 37 7.6 Fig. 26 Depth of the Panel Mount P15 3 7 7.6 To ensure sufficient air circulation, you must leave a minimum of 0.6 inch (15 mm) extra space. BDA−N6−ALL−US−1.0 www.noax.com Page 15 of 28...
All operating and inidactor devices are located on the front of the Industrial PC. There are LED’s in the upper area and keys in the lower area. Fig. 27 Operating and indicator devices Compact enclosure 12 Zoll C12 Compact enclosure 15 Zoll C15 Stainless steel enclosure 12 Zoll S12 Front installation enclosure 12 Zoll P12 1 −...
Press any key on the external PS2 keyboard (only PS2, not " USB) Press the ON key " Press the touch surface " Moving a PS/2 mouse " í You can reactivate the back light by briefly pressing the key ON (I) BDA−N6−ALL−US−1.0 www.noax.com Page 17 of 28...
(Current loop) Plug or unplug the devices only when the power is off. Exception: USB and IEEE 1394 (Firewire) í Please find more information about optional serial interface modules on our web page www.noax.com. Page 18 of 28 www.noax.com BDA−N6−ALL−US−1.0...
Do not on any account clean the display window with cleaning agents which contain abrasi- ves. The surface will become scratched and matt. You can find more information on the Internet at www.noax.com. BDA−N6−ALL−US−1.0 www.noax.com Page 19 of 28...
+49(0)80 92−8536−55 eMail: hotline@noax.com í You can find more information about this error code on the noax web page in the service section under FAQ.. Handling repairs Please follow these guidelines for fast and smooth repair handling. Please use our service cover letter, which is available on the web page at www.noax.com as a PDF or Word file.
Please contact the hotline or our representative. í Please find more information at www.noax.com. FAQ − frequently asked questions Please look for the FAQ section on our web page in the Service section.
Technical data Technical data Weights Industrial PC − Compact C12: approx. 12.32 lbs / 5.6 kg (depending on integrated options) Industrial PC − Compact C15: approx. 21.34 lbs / 9.7 kg (depending on integrated options) Industrial PC − Stainless steel S12: approx.
Both cards may not exceed the maximum power consumption of 20 W! Please observe the maximum currents at all times! Cards installed into the two combi slots raise the internal tem- perature and lower the maximum specified ambient temperature! BDA−N6−ALL−US−1.0 www.noax.com Page 23 of 28...
All other fuses on the mainboard are self−healing and as a rule must not be replaced. Fuses may only be changed by authorized professionals. The above−mentioned technical data for fuses must be observed at all times. For further questions, please contact our service personnel Page 24 of 28 www.noax.com BDA−N6−ALL−US−1.0...
This declaration of conformity applies to the following designated products: Type of device: Industrial PC Valid for the following types: 12" Compact C12−N6x−xxxx (P6 / K−xxxxx−12TSI) 15" Compact C15−N6x−xxxx (P6 / K−xxxxx−15TX) 12" Stainless steel S12−N6x−xxxx (P6 / E1−xxxxx−12TSI) 15" Stainless steel S15−N6x−xxxx (P6 / E−xxxxx−15TX) 12"...