Advertisement
EBR-4SC
RAPID Scene Select Plate
Installation
Operating
To select a scene press the requisite
button (press and hold to get scenes 5 to 8
The EBR-4SC provides advanced scene setting functions for the Rapid Lighting Control System.
When used in conjunction with Rapid dimming LCMs and suitable dimming luminaires, complex
dimming can be achieved to suit applications from conference rooms to individual offices. This
product provides for the selection of scenes and the programming of LCMs to provide set dimming
This device should be installed by a qualified electrician in accordance with the latest edi-
tion of the IEE wiring regulations.
User Guide
To raise the light level
To lower the light level
To turn the lights off
(Scene 0 - reserved as
the "off" scene, but can
be programmed to
leave a background
lighting effect.)
Key
1. brown
2. brown/white
3. green
4. white/blue
5. blue
6. white/green
7. orange
8. white/orange
Advertisement
Table of Contents
Related Manuals for CP Electronics Rapid EBR-4SC
Summary of Contents for CP Electronics Rapid EBR-4SC
- Page 1 EBR-4SC User Guide RAPID Scene Select Plate The EBR-4SC provides advanced scene setting functions for the Rapid Lighting Control System. When used in conjunction with Rapid dimming LCMs and suitable dimming luminaires, complex dimming can be achieved to suit applications from conference rooms to individual offices. This product provides for the selection of scenes and the programming of LCMs to provide set dimming This device should be installed by a qualified electrician in accordance with the latest edi- tion of the IEE wiring regulations.
- Page 2 + 44 (0) 333 900 0671 Fax: + 44 (0) 333 900 0674 www.cpelectronics.co.uk Ref: #WD243 Issue 5 Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
Need help?
Do you have a question about the Rapid EBR-4SC and is the answer not in the manual?
Questions and answers
why is number 1 flashing but my lights are fully on with no control . i cant change any settings . my controller is a EBR-4SC