Download Print this page

CP Electronics Vitesse Plus Quick Start

Download this manual

Connect all detectors and switches to the LCM before following this procedure. Refer to the VITP7-MB installation guide

for details on how to do this.

CH1

CH5

Master switch

Mains power supply

CH2

CH3

CH6

CH7

Vitesse Plus Quick Start

CH4

Emergency

lighting

test

Need help?

Do you have a question about the Vitesse Plus and is the answer not in the manual?

Page 1 Vitesse Plus Quick Start Connect all detectors and switches to the LCM before following this procedure. Refer to the VITP7-MB installation guide for details on how to do this. Mains power supply Emergency lighting test Master switch...
Page 2 Use the following procedure with the UNLCDHS handset to get your Vitesse Plus installation up and running: Connect the power to the LCM. It then goes through a Press to turn on the programming handset. ON/OFF power-up sequence of 8 seconds, after which all connected lights switch on.
Page 3 VITESSE PLUS DETECTOR > Program à > Select and press Select and press Detector Program Detector > à User > Scene Panel > Device Info > PROGRAM PROGRAM Time Out Time Out à Select Select Time Out (mins) (mins) Light Level...