Remote Control Parts And Functions - Teac VRDS-701 Owner's Manual

Remote control parts and functions

When the main unit and the remote control both have buttons
with the same functions, this manual explains how to use one of
the buttons. The other corresponding button can be used in the
same manner.
a
STANDBY/ON button
Press this to put the unit into standby mode or turn it on.
b
SOURCE button
Use this to select the playback source.
c
FILTER button
Press this to change the DSD low-pass filter setting (page 28).
12
d
Number buttons
Use these to select and program tracks, for example.
e
REPEAT button (¼)
Use this to change the repeat playback setting (page 20).
f
Analog OUTPUT selection button
Switch the output of analog audio between the analog audio
output connectors and the headphone jack.
g
MUTE button
Press this to minimize the volume.
h
Tray OPEN/CLOSE (-) button
Press this to open and close the disc tray.
i
DIMMER button
Press this to adjust the brightness of the main unit's display.
j
DISPLAY button
k
INFO button
Press this to show information, including upconversion
(page 17).
l
UPCONVERT button
Press this to change the upconversion setting.
m
CLEAR button
Use this to clear programmed tracks.
n
MENU button
Press this to enter setting mode (page 24).
Press this when in setting mode to return to the previous screen.
o
PLAY MODE button
Press this to switch between program and shuffle playback
modes.
p
Skip (., /) buttons/
up/down (k, j) buttons
When input source set to CD
Use these to skip to the previous or next track.
Press and hold these buttons during playback to search back-
ward/forward (page 20).
When the menu screen is open
Use these buttons to select setting values.