Table of Contents
Advertisement
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Changing the cooking time
You can change the cooking time at any time.
Press
on the display.
1.
Press the cooking time
2.
Use the setting ring to change the cooking time.
3.
To confirm the change, press
4.
a The change is applied.
Cancelling the cooking time
You can cancel the cooking time at any time.
Press
on the display.
1.
Press the cooking time
2.
Reset the cooking time using
3.
Note: For operating modes that always require a
cooking time, the appliance resets the cooking time
to the preset value.
To confirm the change, press
4.
a The change is applied.
10.2 Setting the end time
You can delay the time at which the cooking time for
the operation is due to end by up to 24 hours.
Notes
¡ To achieve good cooking results, do not delay the
time once the operation has already started.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ An operating mode and temperature or level have
been set.
¡ A cooking time is set.
Press
"End time".
1.
To set the time, press the hour display or the minute
2.
display.
a The selected value is marked in blue.
Use the setting ring to delay the time.
3.
If required, use
to reset the setting value.
To confirm the set time, press
4.
Press
to start the operation.
5.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the
operation has finished.
Once the cooking time has elapsed:
6.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
to switch the ap-
.
on the display.
.
.
on the display.
on the display.
to switch the ap-
Changing the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
Press
on the display.
1.
Press the end time
2.
Use the setting ring to change the end time.
3.
To confirm the change, press
4.
a The change is applied.
Cancelling the end time
You can delete the set end time at any time.
Press
on the display.
1.
2.
Press the end time
Use
to reset the end time.
3.
Note: For operating modes that always require a
cooking time, the appliance resets the time at which
the cooking time ends to the next possible time.
To confirm the change, press
4.
a The change is applied.
10.3 Setting the timer
The timer runs independently during the operation. You
can set the timer for a time up to 24 hours. The timer
has its own signal so that you can tell whether it is the
timer or a cooking time that has elapsed.
Press .
1.
To set the timer, press the relevant time value on
2.
the display, e.g. hour display "h" or minute display
"m".
a The selected value is marked in blue.
Set the timer using the setting ring.
3.
If required, use
to reset the setting value.
To start the timer, press on the display.
4.
a The timer counts down.
a The timer remains visible on the display if the appli-
ance is switched off.
a When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status display.
a Once the timer has elapsed, a signal sounds. A
message appears on the display confirming that the
timer has finished.
Changing the timer
You can change the timer at any time.
If the timer is running in the background, use to
1.
select the timer beforehand.
Press .
2.
Change the timer using the setting ring.
3.
Press to confirm.
4.
Cancelling the timer
You can cancel the timer at any time.
If the timer is running in the background, use to
1.
select the timer beforehand.
Press .
2.
Reset the timer using
3.
Press to confirm.
4.
Time-setting options en
.
on the display.
.
on the display.
.
13
Advertisement
Table of Contents
