Samsung UN JS7000F Series Service Manual page 65

3. Disassembly and Reassemble
Description
3
Remove the ASSY COVER P-REAR.
4
Remove the Electric tapes shown on the
image.
• EMI Point
paper from the LVDS Cable bottom,
attach the LVDS Cable to the C/
Chassis and rub the attatched
surface.
CAUTION
When assembling the TV, the electric
tapes must be applied on the same
locations.
Please remember to take a picture of
where the tapes were first applied.
5
Remove the Power Cables and Speaker
Cables.
Remove the LVDS Cable, Panel Wire
Cable and ASSY BOARD P-FUNCTION
ASSY Cable.
NOTE
EMI SPEC
When you reassemble the set,
remove the release paper from the
LVDS Cable bottom and attach the
LVDS Cable to the B/Chassis and rub
the attached surface.
3-2
: After removing release
Release paper
Picture Description
Filament Tape: EMI Point
Filament Tape: Dressing Point
Cable Dressing
Power Cable
Speaker Cable
Panel Wire Cable
LVDS Cable
ASSY BOARD
P-FUNCTION ASSYCable
LVDS Cable
Screws