Restarting The Device; Removing The Device, Mount, And Suction Cup; Removing The Mount From The Suction Cup; Removing The Suction Cup From The Windshield - Garmin RV 895 Owner's Manual

Table of Contents

Advertisement

Restarting the Device

You can restart your device if it stops functioning.
Hold the power key for 7 seconds.

Removing the Device, Mount, and Suction Cup

Removing the Mount from the Suction Cup

1 If necessary loosen the nut that secures the mount to the suction cup ball.
2 Turn the device mount to the right or left.
3 Apply pressure until the socket on the mount releases the ball on the suction cup.

Removing the Suction Cup from the Windshield

1 Flip the lever on the suction cup toward you.
2 Pull the tab on the suction cup toward you.

The suction cup will not stay on my windshield

1 Clean the suction cup and windshield with rubbing alcohol.
2 Dry with a clean, dry cloth.
3 Mount the suction cup

The mount does not hold my device in place while I drive

For the best results, you should keep the vehicle mount clean and position the device close to the suction cup.
If the device shifts position while you are driving, you should complete these actions.
• Remove the powered mount from the suction cup arm, and wipe the ball and socket with a cloth.
Dust and other debris may reduce the friction in the ball and socket joint and allow the joint to shift while you
are driving.
• Rotate the hinged arm toward the suction cup as far as your windshield angle allows.
Positioning the device closer to the windshield reduces the effect of jarring and vibration from the road.

My device is not acquiring satellite signals

• Verify the location services feature is enabled
• Take your device out of parking garages and away from tall buildings and trees.
• Remain stationary for several minutes.

The device does not charge in my vehicle

• Verify the vehicle is turned on and is supplying power to the power outlet.
• Verify the interior temperature of the vehicle is within the charging temperature range indicated in the
specifications.
• In the vehicle fuse box, verify the fuse for the vehicle power outlet is not broken.
52

Troubleshooting

(Mounting and Powering the Device in Your Vehicle, page
(Enabling or Disabling Location Services, page
3).
47).
Troubleshooting

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rv 1095Camper 895Camper 1095

Table of Contents