SHAKS S2i How To Connect

How to pair SHAKS2i
controller with your Android
Device (Phone, Tablet)
Your Device
Android, Fire TV Stick
Attention! If the power is on, the mode will not be
changed, even though you change the mode switch.
The mode will be changed based on mode switch
status when it reboots only.

Connect your device

Step 1:
Power on: Press 'Power button' for 3 seconds. When
the gamepad is turned on by pressing the 'Power
button', the default is Android mode. Change mode
according to the above table. And follow step 2 based
on the device you wish to connect. After the initial
setup is complete, the gamepad will remember your
device to connect automatically.

Step 2: BT Pairing:

Press the 'Pairing button' at the bottom for more than
2 seconds and find & select 'SHAKS S2i' on the device.

Connecting with an Android Device (Phone, Tablet)

1.
Mode Set-Up: Power off, change the mode to
'Android Switch' and power it on.
2.
Connecting: Please proceed "Pairing" process and
check Bluetooth name "SHAKS S2i xxxx Android" in
the paired list of your device. If there are paired
devices before, gamepad will do "Reconnect".
3.
When "Pairing" is successful: LED signals #2,3 turn
off and #1,4,5 light up.
LED Display
arenapro.ae
Bluetooth Name
SHAKS S2i xxxx Android
Mode Switch