Panasonic NV-HS880EG Service Manual page 6

referring "SECTION 2. Disassembly Procedure".
B. Remove the 3 screws (A) of the CYLINDER UNIT with a screw
driver.
C. Unlock the 4 locking tabs (B) and disconnect the Cylinder
fiexible card from the FPC Holder.
D. Remove the CYLINDER UNIT.
CAUTION:
Handle the Cylinder fiexible card with care. When it damaged, you
should replace whole Cylinder unit.
2. UPPER CYLINDER DISASSEMBLY
A. Remove 2 screws (A).
B. Remove the Cylinder Stator Unit.
C. Remove 2 screws (B).
D. Remove the Cylinder Rotor Unit.
E. Loose Hex screw (C) (1.5 mm) and remove the CYLINDER
RETAINER.
F. Remove the Upper Cylinder.
Fig. S3
Fig. S4
6