Onkyo TX-SR606 Instruction Manual page 100

Troubleshooting—Continued
Important Note Regarding Video Playback
The AV receiver can upconvert component video, S-Video, and composite video sources for display on a
TV connected to the HDMI OUT. However, if the picture quality of the source is poor, upconversion may
make the picture worse or disappear altogether.
In this case, try setting the HDMI Output Resolution setting (page 80) to 480p or 720p. If that doesn't
improve the picture quality, try the following:
1. If the video source is connected to a component video input,
connect your TV to the COMPONENT VIDEO OUT.
If the video source is connected to an S-Video input,
connect your TV to an S-Video output.
If the video source is connected to a composite video input,
connect your TV to a composite video output.
2. On the main menu, select "1. Input Assign,"
and then select "1. HDMI Input."
Select the relevant input selector, and assign it to "-----" (page 43).
3. On the main menu, select "1. Input Assign,"
and then select "2. Component Video Input" (page 44):
If the video source is connected to COMPONENT VIDEO IN 1,
select the relevant input selector, and assign it to "IN1."
If the video source is connected to COMPONENT VIDEO IN 2,
select the relevant input selector, and assign it to "IN2."
If the video source is connected to an S-Video input or composite video input,
select the relevant input selector, and assign it to "-----".
100