Hide thumbs Also See for Kwun-B10L2:

Advertisement

Quick Links

Unscrew the bolt on the battery cover on the right of Kwun body counterclockwise, and open the battery cover.
Remove the 4G network cover using a Phillips screwdriver.
Insert the Nano SIM card and resume the installation.
1
* You need to buy and insert Nano SIM card by yourself
* Main traffic usage scenario: device interface interaction is about 3.2KB/s, and one OTA is about 1-50MB
* You need to configure the VPN for 4G network modules. For details, see the LTE Modem APN Configuration
Instructions.
1. Align and insert the battery until it is inserted into the power socket at the bottom.
2. Cover the battery cover and fasten the battery cover bolts clockwise.
2
3
Press the power button to start the device. When the first red light is off, the device is normal and enters the
initialization state.。When the green light is steady on and the red light is off (the buzzer beeps once), and the
initialization is successful (about 22s).
4
Scan QR code, download and install the latest official APP software "AI Kwun"
5
深圳怪虫机器人有限公司 SHENZHEN KWUNPHI ROBOT CO., LTD.
Kwun-B10L2 First use of Quick guide

Installing a SIM Card

Install battery

Install the brush roller support

Power on

Software download

1 / 3
Android 版本 APP
iOS 版本 APP

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kwun-B10L2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kwunphi Kwun-B10L2

  • Page 1 深圳怪虫机器人有限公司 SHENZHEN KWUNPHI ROBOT CO., LTD. Kwun-B10L2 First use of Quick guide Installing a SIM Card Unscrew the bolt on the battery cover on the right of Kwun body counterclockwise, and open the battery cover. Remove the 4G network cover using a Phillips screwdriver.
  • Page 2 深圳怪虫机器人有限公司 SHENZHEN KWUNPHI ROBOT CO., LTD. Register account and bind device After downloading the APP client and installing it, follow the procedure below to register an account and bind the device. The Kwun’s ID code is located on the underside of the battery cover...
  • Page 3 Attention 1. Use the product as instructed in the manual. Only use the accessories recommended or sold by the manufacturer,Please refer to the Kwun-B10L2 PV panels cleaning robot Kwun manual. 2. Make sure the supply voltage meets the voltage specified on the charger.

Table of Contents