Page 1
Ne retournez pas cet article. HOUSE BED FRAME / CADRE DE LIT DE MAISON FR : cs.fr@costway.com Contactez notre service à la clientèle pour obtenir de l’aide. THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Page 2
Before You Start Avant de Commencer Read each step carefully before starting. It is very important Lisez attentivement chaque étape avant de commencer. Suivez to ensure each step followed in correct order, otherwise l’ordre correct. assembly difficulties may occur. La plupart des pièces ont les parties étiquetées ou imprimées Most of board parts are labeled or stamped on the raw sur le bord.
Page 3
Detail View/Vue Détaillée Part List/Liste des Pièces Leg (Left front&Right back)/ Horizontal bar/Barre horizontale Pied (Avant gauche et Arrière droit) HB/FB - 4pcs - 2pcs Leg (Left Back&Right front)/ Side rail (Front Back)/ Pied (Arrière gauche et Avant droit) Rail latéral (Avant arrière) - 2pcs -2pcs Upper horizontal (Front Back)/...
Page 4
Hardware List/Liste du Matériel STEP/ÉTAPE 1: 4PCS 4PCS (Ø15)1/4"*100mm (1/4")4.5*58mm Hex-Head bolts/ Allen key/Clé Allen Boulons à tête hexagonale (1pc) (14pcs) 65mm (Ø15)1/4"*80mm (Ø12)1/4"* Hex-Head bolts/ Hex-Head bolts/ Boulons à tête hexagonale Boulons à tête hexagonale (8pcs) (6pcs) 1/4"*15 (9.5mm) Horizontal-Hole bolts/ Ø4*30mm Boulons à...
Page 5
STEP/ÉTAPE 2: STEP/ÉTAPE 3: 4PCS 4PCS 2PCS Note: Part 5 will face up with the "x" mark on it, otherwise it cannot be tightened Remarque : La partie 5 sera face vers le haut avec la marque « x », sinon elle ne peut pas être serrée.
Page 6
STEP/ÉTAPE 4: STEP/ÉTAPE 5: 2PCS 14PCS 14PCS Remark: Upper horizontal (K) paste stickers WARNING: DO NOT HANG ON THIS BAR! Remarque : Collez les autocollants horizontaux supérieurs (K) AVERTISSEMENT : NE PAS ACCROCHER SUR CETTE BARRE !
Page 7
STEP/ÉTAPE 6: 16PCS 69mm(2.7") Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break. Do not lock the bed slats on the edge of the wood, please hold firmly before screwing , hold it in place with one hand, then lock the screw.
Page 8
Care and Maintenance Entretien Use a soft, clean cloth that will not scratch the surface when dusting. Pour dépoussiérer, utilisez un chiffon doux et propre qui ne raiera pas la surface. Use of furniture polish is not necessary. Il n’est pas nécessaire d’utiliser l’agent à polir pour meubles. Should you choose to use polish, test first in an inconspicuous area.
Need help?
Do you have a question about the HU10054 and is the answer not in the manual?
Questions and answers