Selecting Xm Radio Channels - Onkyo TX-NR1000 Instruction Manual

C- HDSAT.fm 8 ページ ２００７年３月７日 水曜日 午後１時５３分

Selecting XM Radio Channels

There are three ways to select XM radio channels:
• Channel Search mode: select any channel.
• Category Search mode: select channels by category.
• Direct tuning: enter channel number.
I Channel Search Mode
1
Press the [ENTER] or [TUNING MODE] button
to select "Channel Search" mode.
2
Use the [ ]/[ ] buttons or CONTROL/TUNING
dial to select a channel.
You can also use the [
SELECT/PRESET dial to select a category.
I Category Search Mode
1
Press the [ENTER] or [TUNING MODE] button
to select "Category Search" mode.
]/[ ] buttons or push
2
Use the [ ]/[ ] buttons to select a category, and
use the [ ]/[ ] buttons to select a channel in
that category.
Or push the SELECT/PRESET dial to select a category,
and rotate the CONTROL/TUNING dial to select a
channel in that category.
I Direct Tuning
You can select an XM radio channel directly by entering its
number by remote controller.
1
Press the [DIRECT TUNING] button.
2
Within 8 seconds, use the number buttons to
enter the channel number.
The channel is selected.
For example, to select channel #20, press 0, 2, 0, or 2, 0,
[ENT].
Selecting the Previous Channel:
To listen to the previously selected XM channel, press the
[RETURN] or [EXIT] button.
8