Displaying Hd Radio Information - Onkyo TX-NR1000 Instruction Manual

C- HDSAT.fm 23 ページ ２００７年３月７日 水曜日 午後１時５３分
Selecting HD Radio Multicast Channels
You can select a channel by performing the following steps for
an FM HD Radio station that has multicast channels:
1 Press the [CONTROL/TUNING] dial or [ENTER].
HD Radio channel number blinks on and off on the dis-
play.
2
Use the [CONTROL/TUNING] dial or [
ton to select a channel.
If you select a channel with no broadcast underway, you
will see [+] symbol next to the "HD" indicator; the
channel will not change over, but remain in a channel
reserve state. Upon receiving signals from any station
when it comes on the air, the reserve mode is disen-
gaged to switch channel to that station automatically.
Note:
Multicast channel is not available in AM broadcast.
Selecting Audio Format (Blend Mode)
You can select either to receive analog broadcast or digital by
performing the following step:
1
]/[ ] but-
For HD Radio stations with multicast channels, select Channel
1 before you switch between "Auto" and "Analog." Channel 2-
8 support digital broadcasts only.

Displaying HD Radio Information

Press the [DISPLAY]/[Display] button repeatedly to cycle
through other display modes.
Channel Reserve
1. Song Title/Artist information
Displays the song title and artist name on air.
2. Station information (INFO)
Displays HD Radio station information.
3. Artist information (NAME)
Displays the playing artist name on air.
4. Song Title information (TITL)
Displays the song title on air.
Press the [AUDIO SELECTOR] / [Audio SEL] button.
Selection switches over between "Auto" and "Analog."
Auto: Receives digital broadcast as preference.
Analog: Receives analog broadcast.
23