Procedures
Set up
•
When a case is used, place it on a flat surface that can support the unit. Select a working area which is secure, stable,
convenient, and suitable for use during the period of the dive.
•
Conduct a visual inspection of unit to insure no damage has occurred during transportation to the job site, or since the
last time the unit was used.
•
Connect an external power source if needed
•
Connect the Diver Umbilicals
•
Turn the system ON
Version: 1.2 - Date: 02-09-2022
SCC-2DR-DSP-L1.0 Manual
www.novasub.com
9 of 14