Advertisement
STANDBY/ON
STANDBY
1
MULTI CH
DVD
VIDEO
VCR
PHONES
SPEAKERS
A
B
TONE
Positioning the XM Passport System
You can check the signal strength of the XM radio signal
and adjust the position of the XM Passport System
accordingly.
1
On the AV receiver, press the
SETUP
[SETUP] button.
2
Use the TUNING Up and Down
[ ]/[ ] buttons to select "7. ANT
TUNING
PRESET
Aiming," and then press
[ENTER].
3
Adjust the position of the XM
Passport System so that the SAT
signal strength bar is as long as
possible.
If you can't receive a satellite signal,
press the Down [
the terrestrial (TER) signal strength
meter and adjust your XM Passport
System so that the bar is as long as pos-
sible.
Terrestrial signals are only available in
certain areas.
So long as the signal strength is good,
you can enjoy XM Radio by using
either satellite or terrestrial reception.
6
ENTER
TUNING
MASTER VOLUME
TUNING
PRESET
ENTER
2
3
VIDEO
VIDEO
TAPE
TUNER
C D
RETURN
SETUP
VIDEO
VIDEO
DIGITAL
TUNING
THX
LISTENING MODE
DISPLAY
INPUT
DIMMER
MEMORY
MODE
CLEAR
SETUP
] button to display
XM Radio Messages
The following messages may appear while using XM
radio.
❑ CHECK ANTENNA
3 INPUT
L
AUDIO
R
The XM Passport System is not connected properly.
Check the connection.
❑ UPDATING
The XM user encryption code is being updated. Please
wait.
❑ NO SIGNAL
The signal is too weak. Check the XM Passport System
connection and reposition it for the best reception.
❑ LOADING
The AV receiver is tuning or decoding audio or text data.
Please wait.
❑ OFF AIR
The XM channel you selected is not currently broadcast-
ing. Select another channel.
Advertisement
