Related Manuals for Necta Vending Solutions SpA StarFood
Summary of Contents for Necta Vending Solutions SpA StarFood
- Page 1 INSTALLATION, USE AND MAINTENANCE MANUAL StarFood English DOC. NO. H 171U 02 EDITION 3 2004 -01...
- Page 3 DICHIARAZIONE DI CONFORMITA’ DECLARATION OF CONFORMITY DÉCLARATION DE CONFORMITÉ KONFORMITÄTSERKLÄRUNG DECLARACIÓN DE CONFORMIDAD DECLARAÇÃO DE CONFORMIDADE VERKLARING VAN OVEREENSTEMMING INTYG OM ÖVERENSSTÄMMELSE OVERENSSTEMMELSESERKLÆRING YHDENMUKAISUUSTODISTUS Valbrembo, 03/05/2001 Dichiara che la macchina descritta nella targhetta di identificazione, è conforme alle disposizioni legislative delle direttive: 89/392, 89/336, 73/23 CEE e successive modifiche ed integrazioni.
-
Page 5: Table Of Contents
PROGRAMMING MENU - SUMMARY PAGE 29 CHANGE TUBES CONTROL PAGE 12 WIRING DIAGRAM PAGE 54 ADJUSTING THE AIRFLOW PAGE 12 ANTI-TAMPERING CHECK PAGE 13 TEST PAGE 13 EVADTS TRANSFER PAGE 13 © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 6: Introduction
Serial number Product code Model Frequency Type Operating voltage Current Absorbed power Refrigeration system class Type and amount of refrigerant © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 7: Positioning The Vending Machine
The machine should be positioned with a maximum incli- nation of 2°. If necessary provide proper levelling by way of the adjust- able feet included. A front foot panel is available as accessory. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 8: Technical Specifications
0.3 Kg of R134a refrigerant - Liquid Crystal Display for each drum to indicate the sales price. Fan-forced evaporator - Cooling unit with electronic temperature control. Programmable defrosting cycle © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 9: Loading And Cleaning
Drum rotation button The vending machine is suitable for dispensing food Lock for payment system door Space for user information that is hermetically sealed and kept refrigerated. Coin return flap © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 10: Internal Components
The message “Loading with the door open” is indicated on CPU board the display and dispensing is disabled. RS 232 serial port Programming access button Failure reset button Programming switch Liquid crystal display Coin chute Coin return lever © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 11: Hygiene And Cleaning
F.I.F.O. it will be necessary to fill all products exceeds the safety temperature. sectors. NOISE LEVEL The continuous, weighted equivalent acoustic pressure level is below 70 dB. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 12: Routine Maintenance
Switch off the machine in the event of failure or malfunction. Any repairs should be carried out exclu- sively by qualified personnel using original spare parts only. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 13: Installation
The electrical safety of the machine is ensured only when - adjust the coin chute according to the type of coin it is correctly earthed according to the safety standards in mechanism installed. force. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 14: Operating Modes
For the following 10 minutes the closing attempts will be repeated every 60 seconds. The closing attempts are indicated by a sound and on the display. Fig. 8 © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 15: Loading
A sensor detects the passage of a magnet, located on the number of detected compartments for each drum and the edge of each drum, identifying the home point. position of the home point magnet will be stored. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 16: Filler Menu
It is also possible to unlock a single drum to be rotated 4 - coin mechanism data. manually until the hole is aligned with the adjustment The printout will also contain the machine code, the date screw. and the software version. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 17: Anti-Tampering Check
With these function, pressing the loading buttons does not change the status of a drum and/or of a sector (full/empty/ expired). © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 18: Technician Menu
Gas temperature sensor Display relative Selections The display will indicate the message if a short-circuit is Time bands detected on the temperature control sensor of the hot-gas Failures evaporator. Coin mech. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 19: Programming The Parameters
It is possible to define which, among the coins recognised by the validator, are to be accepted. Check the label on the coin mechanism for the correct coin to value matching, indicating the position of the coins. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... - Page 20 “exact amount” condition. Check the coin mechanism configuration for the correct coin to value matching. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02...
-
Page 21: Common Functions
A four-digit code can be assigned to each drum, identifying the drum when processing the statistical data. SLIDER PARAMETERS Slider opening time Setting the amount of time for slider opening (10 sec. by default). © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 22: Cold Parameters
ENABLE COLD UNIT the start-up phase of the machine. The cooling unit operation can be disabled. The change will apply when restarting the machine. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 23: Miscellaneous
Press the confirm button “ ”, the message “Working” is displayed for a few seconds and all statistics are reset. N.B.: when resetting the total statistics also the relative statistics are reset. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... - Page 24 Value of money cashed for dispensing with key Money inserted in the coin mechanism through the manual filling function. Audit 12 Money dispensed manually Value of coins dispensed manually with the dispensing buttons on the coin mechanism. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02...
-
Page 25: Test
Press confirm button “ ” and the display will indicate the message “Confirm?”. Press confirm button “ ” a second time and the message “Working” is displayed for a few seconds. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 26: Gsm
EVADTS terminal. reset. Programming works as in the “Pass” code. EVADTS CONNECTION When activating this function, the machine awaits the connection with a device to acquire the EVADTS statis- tics. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 27: Maintenance
- 24 V DC power supply to board - BDV connector - MDB connector - Coin mechanism setting dip-switches - Connector not used - Buzzer - RS232 connector - Connector not used - Validator connector © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 28: Actuation Board
3 disk magnet 4 disk magnet 5 disk magnet 6 disk magnet 7 disk magnet 8 disk magnet 9 disk magnet 10 disk magnet 11 disk magnet 12 © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 29: Self-Diagnosis Function
In the event of a short-circuit the value 41.0 is displayed. Press “ ” to advance. At the end of the test cycle, switch the machine off and place Dip-switch 1 back to the OFF position. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 30: Drum Maintenance
After every change to the number of sectors, the stop device (see Fig. 9) on the slider guide must be adjusted again. Undo the stop screw, using a Phillips screwdriver, and move it to the new position. © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 31: Disassembling The Drum Stack
3 - Rods 4 - Half-disk fastening catches 1 - Shaft 5 - Snapping cuts 2 - Shaft supports 6 - Support fastening hook 3 - Hexagon head screws 7 - Divider © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 32: Cooling System
Power supply to coin mechanism and CPU board Connection to sensors are stopped, to avoid a temperature increase inside the Connection to cold unit refrigerated box. Connection to control board © by NECTA VENDING SOLUTIONS SpA 0401 171 - 02... -
Page 58: Wiring Diagram
OPEN DOOR MICROSWITCH SP1-10 LOADING BUTTONS OPEN PAYMENT COMPT. MICROSWIT STARTER DISK MOTOR C.P.U. BOARD MS1-.. SLIDER MICROSWITCH REMOTE CONTROL SWITCH COMPRESSOR TRANSFORMER TX..DELAYED FUSE (X=COURRENT) NTC1 REFRIG. BOX TEMPERATURE PROBE © by NECTA VENDING SOLUTIONS SpA 0401 171- 02... - Page 59 © by NECTA VENDING SOLUTIONS SpA NOTE...
- Page 60 Sx35703...
- Page 61 StarFood...
- Page 62 Sx35803...
- Page 63 StarFood...
- Page 64 © by NECTA VENDING SOLUTIONS SpA NOTE...
- Page 65 © by NECTA VENDING SOLUTIONS SpA NOTE...
- Page 66 © by NECTA VENDING SOLUTIONS SpA NOTE...
- Page 67 The Manufacturer reserves the right to modify, without prior notice, the characteristics of the equipment described in this publication; and further declines to accept any responsibility for any inaccuracies contained in this publication which can be ascribed to printing and/or transcription errors. All instructions, drawings, tables and information contained in this publication are confidential and can neither be repro- duced completely or in part, nor be transmitted to third parties without the written permit of the Manufacturer, who has the sole ownership.
Need help?
Do you have a question about the StarFood and is the answer not in the manual?
Questions and answers